Dynacord PM 1000/2

[taskedallape]

Ljudi zanima me malo o ovoj mixeti nasao sam da kupim,pa savet ko ima da mi da i tako dalje,malo o njoj,o snazi,da li se gusi ili tako nesto slicno...hvala svima ko pomogne!

[TomyCroSound]

Imam PM1000 ali stariju verziju, totalno sam zadovoljan. Noviji model može bit samo bolji, ima par dotataka, a naravno i više snage. Predlažem da kupiš.
(Ovisi što tražiš, ako je velika razlika u cijeni, bit ćeš zadovoljan i sa starim modelom)

[taskedallape]

Nasao sam za 1300e ima garanciju do 20 decembra coveku trebaju hitno pare? Sta mislis? Koliko je ona snage na 8,4 i2 oma

[TomyCroSound]

Puno me pitaš. ne znam. Novi model je 2x700, a sad kako i na koliko oma, blage nemam, pretpostavljam da je tih 700 na 4 ohma. Prije sam spajao bas binove i dvosistemce (8ohm) na ovaj stari model, radilo je odlično. Dosta bendova sam viđao s tim Dynacordom, a neki furaju dodatni slave za binove...

[amavrenski]

evo kompletna specifikacija:

2x 700W/4 Ohm, 2x 870W/2,6 Ohm, 6 mic channels,
4 mic or stereo channels, 2 x 18bit Stereo-Effect,
4 Auxs, mutes per chanel, neu 7-Band-Master-EQ,
Feedback-Filter, optional 19" Rackmount-Kit (NRS 90220 necessary), 20 kg



Technical Specifications

Mixing desk in rated condition, Unity Gain ( MIC
Gain 20 dB ), all faders position 0 dB, all pots in mid position,
master fader + 6dB, amplifi er rated output power
into 8 ohms, dual channel, unless otherwise specified.
Maximum Midband Output Power, 1 kHz, THD=1%
into 2.66 Ohms 2 x 870 W
into 4 Ohms 2 x 700 W
into 8 Ohms 2 x 430 W
Rated Output Power, THD=0.1%, Single Channel
into 4 Ohms 2 x 700 W
into 8 Ohms 2 x 350 W
Maximum Output Voltage of power amplifi er, no load 70 Vrms
THD at 1kHz, MBW=80kHz
MIC input to Main L/R output, +16 dBu, typical < 0.005%
Power amplifi er input to Speaker L/R output < 0.01%
DIM 30, power amplifi er < 0.01%
IMD-SMPTE, power amplifi er, 60Hz, 7 kHz < 0.01%
Frequency Response, -3dB ref. 1kHz
Any input to any Mixer output 15Hz ... 80kHz
Any input to Speaker L/R output 20Hz ... 70kHz
Crosstalk, 1kHz
Fader and AUX-Send attenuation > 85 dB
Channel to channel > 80 dB
CMRR, MIC input, 1kHz > 80 dB
Input Sensitivity, all level controls in max. position
MIC input -74 dBu (155 μV)
LINE Input (Mono) -54 dBu (1.55 mV)
LINE Input (Stereo) -34 dBu (15.5 mV)
Power Amplifi er Input +6 dBu (1.55 V)
Maximum Level, mixing desk
MIC inputs + 21 dBu
Mono Line inputs + 41 dBu
Stereo Line inputs + 30 dBu
All other inputs + 22 dBu
Record Send output + 14 dBu
All other outputs + 22 dBu
Input Impedances
MIC 2 k ohms
Insert Return 2.2 k ohms
EQ Input and 2 Track Return 8 k ohms
All other inputs > 15 k ohms
Output Impedances
Record Send 1 k ohms
Phones 47 ohms
All other outputs 75 ohms
Equivalent Input Noise, MIC Input, A-weighted, 150 ohms -130 dBu
Noise, Channel inputs to Main L/R outputs, A-weighted PM1000 PM1600
Master fader down -95 dBu -95 dBu
Master fader 0 dB, Channel fader down -90 dBu -88 dBu
Master fader 0 dB, Channel fader 0 dB, Channel gain unity -83 dBu -82 dBu
Signal/Noise-Ratio, power amplifi er, A-weighted 105 dB
Equalization
LO Shelving ± 15 dB / 60 Hz
MID Peaking, mono inputs ± 15 dB / 100 Hz ... 8 kHz
MID Peaking, stereo inputs ± 12 dB / 2.4 kHz
HI Shelving ± 15 dB / 12 kHz
Master EQ, 2x7-band, 63, 125, 400, 1k, 2k5, 6k, 12k Hz ± 10 dB / Q=2.0
Power Consumption at 1/8 maximum output power, 4 ohms 640 W
Dimensions, (WxHxD), mm
PowerMate1000 514.5 x 210.5 x 504.5
PowerMate1600 673.5 x 210.5 x 504.5
Weight, without lid
PowerMate1000 20 kg
PowerMate1600 23.5 kg
Optional
RMK-1000 (Rack-Mount-Kit PowerMate1000-2) 112 698
Gooseneck Lamp, 12V/2.4W, 12?, XLR 112 700
FS11 (Footswitch) 110 693

[branoy]

Ja je koristim sa zx5 i radi ok. poz

[sukizg]

hej kad smo vec kod tih zx5 i dynacorda powermate, sta bi bilo dobro za kombiniranje uz par zx5???? koje kutije da kupim jos uz to???? hvala.

[branoy]

iste ili d lite 3

[taskedallape]

Imam Rcf art 500A,kako ce raditi to?

[dugmic]

koristim 2 zx 4 i 2 sx 300 sa pm 1000