[Sejox]

Ne znam na koji nacin se to rjesava jednostavno kod G1000.
Mozda je potreban RESET klavijature na fabricko stanje-mozda....

Malo sam cackao po netu i sa neke stranice "Rolandovog kluba" cini mi se,nasao sam neke instrukcije i uputstvo za RESTORE fabrickih postavki.

Ukoliko se odlucis to da radis,obavezno napravi BACKUP svih boja,ritmova,....itd
Koliko vidim,za to je potrebna neka originalna fabricka Zip disketa,koja dolazi uz klavijaturu.

Uglavnom,tamo na engleskom jeziku(snadji se za prevod) pise sljedece:


Q: Initializing the G-1000 - Restoring the Factory Settings


A: The following procedure can be used to clear the internal memory and reload the factory settings:

(CAUTION: All USER information will be lost. Be sure to back up any information you wish to keep.)

The G-1000 does not have a "hard reset" function to load the factory settings.
Performance Sets, MIDI Sets and Custom Sets need to be loaded from the G-1000 factory ZIP disk to restore factory default settings. Use the following procedure to restore the original factory data from the factory ZIP Disk:

Use the following procedure to prepare the G-1000 for loading the factory ZIP disk files:

1) Turn the unit off.
2) Insert the factory ZIP Disk into the drive.
3) Turn the unit on.

Now select the desired factory sets:

To Load Performance Sets:
1) Press F5 [Disk.]
2) Press F1 [Load.]
3) Press PAGE ^ / v to select "PRF MEM."
4) Press UPPER 1[Execute] to load the Performance Memory data.
5) Press F5 [Exit] to return to the Master page.

To Load MIDI sets:
1) Press F5 [Disk.]
2) Press F1 [Load.]
3) Press PAGE ^ / v to select "MIDI Set."
4) Press UPPER 1[Execute] to load the MIDI Set data.
5) Press F5 [Exit] to return to the Master page.

To Load Custom Sets to the Custom memories:
1) Press F5 [Disk.]
2) Press SHIFT and F3 [Utility.]
3) Press F1[CstLd.]
4) Turn the ACCOMP/GROUP knob to select Custom Set "US-STL01."
5) Press UPPER 1 [LOAD] to load this Custom Set.
6) Press LOWER 1 to confirm the loading procedure.
7) Press F5 [Exit] to return to the Master page.

(G-1000)


Pozdrav,