Otvori manual i pogledaj u globalu gde se podešaba SCALE TYPE...moraš malo da se potrudiš
Vidi šta kaže manual o tome( ovo je za sekvencer mod ali je isto i za PRG i COMBI):
Changing the scale
You can specify the scale for each program, for each
timbre in a combination, or for each track of a song
(Sequencer mode).
These settings are made by “Type” in the following
pages, and by “Use Program’s Scale” for a combination
or sequencer.
Here we will show how to make settings in Sequencer
mode.
1 Press the [SEQ] key to enter Sequencer mode.
2 Press the [MENU] key, and then press the [F3] key
to select “Prm2” Press the [F8] (“Open”) key.
3 Select the [F1](“Othr..8”) key or the
[F2](“Othr..16”) key.
4 If you wish to use the scale that is specified for the
program used by a track, check the “Use Prog’s
Scale” check box for that track.
Tracks that are not checked will use the scale specified
by Scale “Type.”
5 Set “Type (Song’s Scale)” to select the scale for the
entire currently selected song.
If you wish to keep this setting aft,er the power is
turned off, you must Write the Global settings to
memory.
P.S. namerno sam ti stavio text na engleskom zbog komandi,a ako ne znaš engleski reci da prevedem,nije problem?
|