[tpotocnjak]

maleni data sheet for this emulator Floppy to SUB converter for USB Flash/Pen Drives

Get rid of floppies and Floppy Drives. Use Pen drives using our floppy to usb emulator in place of floppy disk drive on your machines! Replace your legacy Floppy disk drive with our floppy to usb Converter! Use USB Pen Drive instead of vulnerable . Floppy disk! Store data of up to 100 floppy disk on one Pen drive and can access the same using floppy emulator! With the rapid growth and advancement of USB technology, especially USB storage devices, traditional and mind bothering floppy drive and floppy disk are gradually being moved out of usage. Several old machines and devices are still dependent on old floppy disk drive as the only way of inputting the data for processing. To mention few of these are Robots and Machines used for knitting, laser-cutting devices, weaving, embroidery, musical keyboards, milling, CNC and injection molding are still getting their source by the use of so called vulnerable floppy drive and floppy disk drive. Adding to the vow of industrial users in addition to the waste of financial resources a lot of precious time is being wasted in inputting data in the machines using floppy disk With the rapid change in USB technology the goods news for users is that: No more waste of time and precious resources as you will never require floppy drive ever again. With the use of our floppy to usb emulator you will have a secure and guaranteed long term reliable solution to your problem of transferring data to your industrial machines. Few of the worries with old Floppy Disk Drive: Non availability at IT retail stores. Gets damaged by Floppy disk when placed in the range of apparatus generating Magnetic effects like Phones, Stabilizers etc Floppy disk are affected by dusty places and other adverse climatic conditions Floppy disk gets weared out Mechanically Out of 10 out of box 7 floppy disk gets damaged on 1st use Floppy disk drive have very low capacity Features of our Floppy to usb Magic Box : Against every one floppy disk drive users need one Floppy to usb upgrade kit or one floppy to usb converter. The floppy drive to usb unit has been designed in such a way that all the connections are same ( data and power ), so no customization needs to be performed while swapping the floppy disk drive to usb unit. The USB Pen Drive when inserted in the USB Floppy Emulator replaces 100 floppies at a time. This floppy disk drive to usb USB converter and Pen drives are almost resistant rather immune to effects created from magnetic field, dusty environment or shocks. A simple software provided at free of cost along with floppy disc to usb converter to format a USB Pen drive into 100 blocks of 1.44/1.2/720 kb capacity each or as per user requirements. This Floppy Disc to USB Converter is a boon for all users working on all devices that currently using old floppy disk drive to transfer data. The most positive of floppy emulator is that no customization is required in apparatus ! Just Plug and Play! Ports, buttons and display of the Floppy to USB adapter (Original Colour of the product may differ ) This floppy to USB Converter puts a new life into your machine as it replaces the old legacy floppy disk drive! User can store up to 100 floppies on a USB Pen Drive! Users carries all important data on a very reliable Media! User can format the usb memory stick into block size as required i.e 1.44mb/1.2mb/720kb! Specifications Floppy Drive to USB Emulator Details Interface • USB socket Type A 4-pin socket like . drive for voltage supply 34-pin channel socket for . controller Compatibility FAT12 File System Fix sector of size: 512 bytes/sector 3.5" -1.44MB: 80 tracks/18 sector 5.25"-1.2MB: 80 tracks /15 sector 3.5"- 720kB: 80 tracks /9 sector Diagnostics LEDs Busy-Green Display Two-digit, 7 segment display to display current virtual . block Voltage supply 5 V DC (ranges 4.5 5.5 V DC) 4pin voltage socket for 3.5" drive Casing Smoke Grey/Black Plastic case Frame size 3.5 inches Measurements W/H/D approximately 100 mm - 25 mm -122 mm Temperature range 0 to 65 C Relative humidity 5% to 90% ( non-condensing) Scope of supply Floppy Disk to usb Converter (Connect like a legacy 3.5" . drive) Switches on Front Panel Left- 10-90 , Right- 00-09, Red Switch ( In case of Keyboards only ) - Jumper 2 Toggle Colour / Specs may change without any prior notice Why should I Convert Floppy to USB? From last many years floppy disk was the only means of transferring data from a computer to another system. These days floppies discs are going extinct and are very hard to find in computers and in local markets. So different countries like UK & USA are providing different tools & kits for converting floppy to USB But, try to focus on the scenario that what will happen if a very expensive industrial machines is hung up just because that you are not able to find any floppy drive in market to replace the defective floppy disk drive which was only the source of entering data into machine. We hope that you are not thinking to store or buy as many floppies as you can so that you can keep your machine running? Need not worry , now everyone has option that will allows to converter floppy to USB on any machine , let it be Industrial pc or old computer that is using an old floppy disc. And the best thing is that there is no need to change any software or any circuit in order to convert floppy to usb on your industrial pc. You only need to convert floppy to usb by replacing the old floppy disk drive with this floppy to usb emulator. There are no tedious or engineering levels of steps involved to convert floppy to usb. You just need to disconnect your old floppy drive and connect the new floppy to usb converter and that's it! You have successfully accomplished a great job of convert floppy to usb, floppy disc to USB, 3.5 floppy to usb, 5.25 floppy to usb. Your industrial machine will now be able to work for many more years, and you don't have to dream about floppies any more. How it works? The floppy disc to USB emulator reads the USB pen drive and emulates the data as a floppy, transferring data to the device/equipment in the same manner that the traditional floppy drives do it. In other words, your machine will never come to know that all the information came from a USB flash drive.this is the first step we have to do, if we want to convert floppy disk drive to usb. You can easily convert floppy to USB on embroidery machines like Tajima, Melco, SWF, Happy and Brother built-in floppy disk drive to USB to read USB memory flash drives. The floppy to usb emulator has the same dimensions of a floppy drive, and also the type of connectors is same. You just need to replace the old floppy drive and plug-in the new floppy to USB to convert floppy to usb, its just plug and play. Most of the Melco EMC was sold without a floppy disc drive. However, if we carefully see almost all of these industrial machines are having floppy disc drive interface on the system motherboard. Also these machines can be very easily upgraded using floppy to usb converter to read USB flash drive. But, as these machines did not have a built-in FDD, you will have to buy a 34 pin fdd cable in order to convert floppy to usb on these machines. So here floppy disc to USB, Conversion is necessary