Videti jedan post
Star 03.02.2009, 23:36   #5
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 83 puta u 69 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

ROLAND G1000 Please call 01792 515003
ROLAND G600 Power on while holding WRITE
ROLAND G-800 HOLD WRITE, THEN POWER ON.
ROLAND G800 Power on while holding WRITE
ROLAND GC-8 no rom reset.
ROLAND GC8 No ROM Reset.
ROLAND GI-10 HOLD PARAMETER + AND -, POWER ON THEN PRESS VALUE +.
ROLAND GI10 Power on whilst holding down the PARAMETER + and - buttons, then press the VALUE + button.
ROLAND GM-70 POLY MODE: HOLD PLAY, GENERAL EDIT, + IND EDIT THEN POWER ON. MONO MODE: HOLD TUNE, CONTROL ASSIGN, AND DATA TRANSFER THEN POWER ON.
ROLAND GM70 Poly Mode: Power on whilst holding down PLAY, GENERAL EDIT and IND EDIT. Mono Mode: Power on whilst holding down TUNE, CONTROL ASSIGN, and DATA TRANSFER.
ROLAND GP-100 HOLD IN PARAMETER KNOB, POWER ON, PRESS WRITE.
ROLAND GP100 Power on whilst pressing in the PARAMETER KNOB, then press WRITE.
ROLAND GP-16 HOLD #6, #7, #8, THEN POWER ON. USE FUNCTION LEFT AND RUGHT TO SELECT "2. ALL FACTORY PRESET"THEN PRESS WRITE 3 TIMES.
ROLAND GP16 Power on whilst holding down the #6, #7 and #8 buttons. Use the FUNCTION (<) and (>) buttons to select "2.All Factory Preset", then press WRITE three times.
ROLAND GP-8 no rom reset.
ROLAND GP8 No ROM Reset.
ROLAND GR (ALL OTHER) no rom reset.
ROLAND GR-09 HOLD PEDAL #2 THEN POWER ON. PRESS VALUE+ THEN PRESS EDIT/PLAY.
ROLAND GR09 Power on whilst holding down the #2 pedal, then press the VALUE + button, followed by the EDIT/PLAY button.
ROLAND GR-1 HOLD WRITE/COPY THEN POWER ON THEN PRESS YES.
ROLAND GR1 Power on whilst holding down the WRITE/COPY button, then press YES
ROLAND GR-30 HOLD PEDAL #2, POWER ON. PRESS PATCH + TO SELECT INIT. PRESS EDIT/PLAY, THEN PATCH + AND - SIMULTANEOUSLY.
ROLAND GR30 Power on whilst holding down the #2 pedal, then press the PATCH + button to select INI. Press the EDIT/PLAY button and then the PATCH + and PATCH - buttons simultaneously.
ROLAND GR33 Press SYSTEM and then PARAMETER. Use the VALUE DIAL to select ALL in the display. Press WRITE twice.
ROLAND GR-50 no rom reset. {*}
ROLAND GS-6 no rom reset.
ROLAND GS6 No ROM Reset.
ROLAND GT3 Power on whilst holding down MOD and SFX. Press WRITE.
ROLAND GT-5 HOLD MOD + FEED BACKER/SLOW GEAR, POWER ON. THEN PRESS WRITE.
ROLAND GT5 Power on whilst holding down MOD and FEEDBACKER/SLOWGEAR. Press WRITE.
ROLAND GT6 Power on whilst holding down PREAMP SPEAKER ON/OFF and TYPE VARIATION. Press ENTER.
ROLAND GT6B Power on whilst holding down COMPRESSOR/LIMITER ON/OFF and TYPE VARIATION. Press ENTER
ROLAND GX-700 PRESS TUNER/UTILITY. USE PARAMETER LEFT AND RIGHT TO SELECT FACT INIT. CURSOR TO LEFT, DIAL SYSTEM, THEN RIGHT AND DIAL P#100. PRESS WRITE THEN TUNER/UTILITY.
ROLAND GX700 Press TUNER/UTILITY. Use PARAMETER (<) and (>) to select FACT INIT. Cursor LEFT and dial SYSTEM then cursor RIGHT and dial P#100. Press WRITE and then TUNER/UTILITY.
ROLAND HP (ALL OTHER) resets at power on.
ROLAND HP-100 no rom reset.
ROLAND HP-300 no rom reset.
ROLAND HP-400 no rom reset.
ROLAND HPD15 Press SYSTEM, then PARAMETER (>) RIGHT to "Factory Reset". Use the PATCH/VALUE DIAL to select ALL and press WRITE
ROLAND HS SERIES no rom reset.
ROLAND JD-800 PRESS DATA TRANSFER. PAGE UP TO SELECT FACTORY PRESET, PRESS YES.
ROLAND JD800 Press DATA TRANSFER. Use page UP and DOWN to select FACTORY PRESET, then press ENTER.
ROLAND JD-990 HOLD EXIT AND PRESS UTILITY. PRESS F6 THEN F5.
ROLAND JD990 Whilst holding EXIT, press UTILITY. Press F6 (EXECUTE) and the F5 (YES).
ROLAND JP-6 no rom reset.
ROLAND JP6 No ROM Reset.
ROLAND JP-8 no rom reset.
ROLAND JP8 No ROM Reset.
ROLAND JP-8000 HOLD SHIFT, PRESS INIT/BULK. PRESS BUTTON 7, USE UP/DOWN (SELECT FACTORY RESET), PRESS WRITE TO SELECT FACTORY PRESET.
ROLAND JP8000 Whilst holding down the SHIFT button, press INIT/UTIL. Press INIT/UTIL again util you get INITALIZE WRITE in the screen. Use the DOWN and UP buttons to select FACTORY PRESET, then press the WRITE button.
ROLAND JP8080 Press EDIT and then Bank 7 (also labelled INIT/UTIL) several times to access "FACTORY RESET " in the display. Press DEC or INC to select ALL in the screen and then press REC followed by WRITE.
ROLAND JS-30 HOLD RECORD BUTTON (SEQUENCER SECTION), POWER ON.
ROLAND JS30 Power on whilst holding down the RECORD button, located in the sequencer section.
ROLAND JS5 Press UTILITY then CURSOR (>) to "Factory Reset?". Press ENTER twice.
ROLAND JUN0-106 no rom reset.
ROLAND JUN0-60 no rom reset.
ROLAND JUNO 1 No ROM Reset.
ROLAND JUNO 106 No ROM Reset.
ROLAND JUNO 2 No ROM Reset.
ROLAND JUNO 6 No ROM Reset.
ROLAND JUNO 60 No ROM Reset.
ROLAND JUNO-1 no rom reset.
ROLAND JUNO-2 no rom reset.
ROLAND JUNO-6 no rom reset.
ROLAND JUPITER 6 No ROM Reset.
ROLAND JUPITER 8 No ROM Reset.
ROLAND JUPITER-6 no rom reset.
ROLAND JUPITER-8 no rom reset.
milanceshow je offline   Reply With Quote