Videti jedan post
Star 03.02.2009, 23:38   #8
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 83 puta u 69 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

ROLAND PC-150 HOLD COMMAND (LEFT), POWER ON.
ROLAND PC-200 HOLD THE 2 BUTTONS UNDER "STANDARD", POWER ON.
ROLAND PIANO PLUS (ALL) no rom reset.
ROLAND PK5 Power on while holding OCT/PARAM
ROLAND PK7 No ROM reset
ROLAND PLANET-P no rom reset.
ROLAND PLANET-S no rom reset.
ROLAND PMA-5 HOLD VALUE, POWER ON. TOUCH 2 CAL. POINTS TOP RIGHT + BOTTOM LEFT OF DISPLAY W/ TOUCH PEN. DISPLAYS COMPLETED THEN INITIALIZE, TOUCH EXEC.
ROLAND PRO-E HOLD WRITE, POWER ON.
ROLAND R-5 HOLD PAGE + SELECT AND POWER ON. PRESS ENTER TWICE AT PROMPTS.
ROLAND R5 Power on whilst holding down CUROR PAGE and PARAM SELECT, then press the ENTER button twice.
ROLAND R-70 HOLD MIDI + ASSIGN AND POWER ON. PRESS YES TWICE AT PROMPTS.
ROLAND R70 Power on whilst holding down the MIDI and ASSIGN buttons.
ROLAND R8 Power on whilst holding down CUROR PAGE and PARAM SELECT, then press the ENTER button twice.
ROLAND R880 No ROM Reset.
ROLAND R-8M HOLD CURSOR RIGHT AND ENTER, POWER ON. PRESS ENTER TWICE AT PROMPTS.
ROLAND R8M Power on whilst holding down ENTER and RIGHT (>) CURSOR, then press the ENTER button twice.
ROLAND R8MKII Power on whilst holding down CUROR PAGE and PARAM SELECT, then press the ENTER button twice.
ROLAND RA30 The unit resets each time you turn it on
ROLAND RA-50 HOLD WRITE THEN POWER ON.
ROLAND RA50 Power on while holding WRITE
ROLAND RA800 Power on while holding WRITE
ROLAND RA-90 HOLD WRITE THEN POWER ON.
ROLAND RA90 Power on while holding WRITE
ROLAND RA-95 HOLD REC, POWER ON.
ROLAND RA95 Power on while holding REC
ROLAND RD100 No ROM Reset
ROLAND RD500 Power on whilst holding down the NUMBER 1 and 8 buttons, then press DEC/YES.
ROLAND RD600 Press EDIT, then the RIGHT PAGE button until "INITIALIZE ALL" is displayed. Press INC/YES twice. Press EDIT to return to the play mode.
ROLAND RD600 Press EDIT, use page button to display INT ALL, press YES twice and EDIT to return to play mode
ROLAND RD700 Press EDIT, then press TONE SWITCH 9. Press ENTER then CURSOR DOWN to FACTORY RESET ALL. Press ENTER and then the YES button.
ROLAND RS5 Press UTILITY. Use the VALUE + or - to select "FACTORY RESET" then press ENTER.
ROLAND RS9 Press UTILITY. Use the VALUE + or - to select "FACTORY RESET" then press ENTER.
ROLAND RSP-550 POWER ON WHILE HOLDING PROG PAGE UP AND DOWN, THEN PRESS WRITE.
ROLAND RSP550 Power on whilst holding down PROGRAM, PAGE UP and PAGE DOWN. Then press WRITE.
ROLAND RSS10 Power on whilst holding down LOCK and OPTION.Press DEMO PROGRAM four times. Then press DEVICE ID.
ROLAND RSS8040 No ROM Reset.
ROLAND RV70 Power on whilst holding down WRITE and DOWN. Use the UP and DOWN buttons to select ALL. Press WRITE, then power the unit OFF and back On again.
ROLAND SB-55 POWER ON WHILE CLEAR.
ROLAND SBX1000 No ROM Reset.
ROLAND SC-155 POWER IN STANDBY MODE. HOLD BOTH INSTRUMENT BUTTONS, PRESS POWER ON AND THEN PRESS ALL.
ROLAND SC155 Power on while holding both INSTRUMENT buttons, then press ALL
ROLAND SC-33 HOLD SPLIT AND REVERB WHILE POWERING ON, THEN PRESS YES.
ROLAND SC33 Power on while holding REVERB and SPLIT, then press YES
ROLAND SC-50 HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL.
ROLAND SC50 Power on while holding both INSTRUMENT buttons, then press ALL
ROLAND SC-55 HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL.
ROLAND SC55 Power on while holding both INSTRUMENT buttons, then press ALL
ROLAND SC-55MKII HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL.
ROLAND SC-55MKII HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL.
ROLAND SC55mkII Power on while holding both INSTRUMENT buttons, then press ALL
ROLAND SC7 The unit resets each time you turn on
ROLAND SC88 While holding SELECT, press both INSTRUMENT buttons, then press ALL
ROLAND SC88pro While holding SELECT, press both INSTRUMENT buttons, then press ALL
ROLAND SD35 Power on while holding CLEAR, then press REC
ROLAND SDD320 No ROM Reset.
ROLAND SDE330 Power on whilst holding down SYSTEM and PROGRAM. Use the DATA DIAL to select SYSTEM + PROGRAM. Press MEMORY.
ROLAND SDX330 Power on whilst holding down SYSTEM and PROGRAM. Use the DATA DIAL to select SYSTEM + PROGRAM. Press MEMORY.
ROLAND SE50 Power on whilst holding down PARAM UP and VALUE UP. Press WRITE, wait for three seconds and the press WRITE again..
ROLAND SE70 Power on whilst holding in the NUMBER/VALUE knob, press PARAMETER (<) LEFT. Use the NUMBER/VALUE knob to select STANDARD mode or GUITAR mode. Press WRITE.
ROLAND SH101 No ROM Reset.
ROLAND SH2000 No ROM Reset.
ROLAND SH32 Power on whilst holding down (1/A), press VALUE UP/DOWN to display ALL in the screen. Press WRITE twice.
ROLAND SN700 No ROM Reset.
ROLAND SP202 Power on wihlst holding down the SOURCE pad.
ROLAND SP303 Power on whilst holding down CANCEL, REMAIN and DEL, then press REC.
ROLAND SP505 Press SONG, then SYSTEM. Press F1(UTILITY) then F3(INIT). Use the VALUE DIAL to select ALL and press F1 twice to execute the operation. Press PTN or SONG to return to the play screen.
ROLAND SP700 No ROM Reset.
ROLAND SP808 Press SYSTEM/DISK and CUROR DOWN to "Init System Parameters?". Press ENTER/YES twice and then press PLAY to return to the basic screen.
ROLAND SP808EX Press SYSTEM/DISK and CUROR DOWN to "Init System Parameters?". Press ENTER/YES twice and then press PLAY to return to the basic screen.
ROLAND SPD11 Power on whilst holding down ALL/ENTER and DOWN. Then press ALL/ENTER again.
milanceshow je offline   Reply With Quote