@Bandzo
Mozes da ubacis u Arpeggio SMF.......
Tako da editovanje za to postoji........
Citat:
You can create your own original Arpeggio Style by importing
SMF or phrase data into an arpeggio user style.
If you want to import SMF data, you must first copy the
Standard MIDI File (SMF) from your computer to the Fantom-G
as described in “Copying a Standard MIDI File (SMF) from
Your Computer to the Fantom-G” (p. 212 in Owner’s Manual).
1.
Hold down [SHIFT] and press [ARPEGGIO].
2.
Press [F1 (Import Style)].
3.
Press [F2 (SMF List)] or [F3 (Phrase List)] to switch the list
from which you want to import.
4.
Turn the VALUE dial to select the SMF or phrase that you
want to import.
By pressing [F7 (Preview)] you can audition the selected SMF or
phrase.
If you decide not to import, press [F8 (Exit)].
5.
Press [F6 (Import)].
6.
Assign a name to the Arpeggio Style that you want to
import. After you’ve assigned a name, press [F8 (OK)].
For details on how to enter a name, refer to “Assigning a Name”
(Owner’s Manual p. 42).
7.
Select the desired Import Destination. Turn the VALUE dial
to make your choice, and then press the [F8 (Write)] button.
A confirmation message will appear.
8.
Press [F7 (OK)] to execute.
The SMF or phrase will be imported into the arpeggio user
style.
Please note the following points regarding importing an
arpeggio.
• Only SMF Format 0 is supported. If the data is incorrect, the
screen will indicate
“Cannot Import SMF Format 1!”
or
“Illegal File!”
.
• Only the note data will be imported from the original data into
the arpeggio.
• Up to 500 events (with a note on/off counting as one event) can
be imported. If there are more than 500 events, the screen will
indicate
“Too Many Data!”
|