ROLAND SPD20 Power on whilst holding down the CURSOR DOWN and ALL/ENTER. Press the ALL/ENTER button again to complete the proceedure.
ROLAND SPD8 Power on whilst holding down EDIT, then press COPY. Use the VALUE UP and DOWN to select "F_A_L" in the screen. Press ALL/ENTER.
ROLAND SRC2 No ROM Reset.
ROLAND SRV1000 No ROM Reset
ROLAND SRV2000 Power on whilst holding down the WRITE and REVERB NON LINEAR buttons.
ROLAND SRV3030 Press MEMORY. Use the NUMBER/PAGE DIAL to display "FACTORY RESET" . Rotate PARAM 3 to set the target to ALL, then press ENTER twice.
ROLAND SRV3030D Press MEMORY. Use the NUMBER/PAGE DIAL to display "FACTORY RESET" . Rotate PARAM 3 to set the target to ALL, then press ENTER twice.
ROLAND SRV330 Power on whilst holding down SYSTEM and PROGRAM. Use the DATA DIAL to select SYSTEM + PROGRAM. Press MEMORY.
ROLAND SSC8004 No ROM Reset
ROLAND SX700 Press UTILITY. Use PARAMETER (<) LEFT and (>) RIGHT to select FACT INIT, then press WRITE.
ROLAND TB303 No ROM Reset
ROLAND TD10 Press SETUP, then press F4 three times.
ROLAND TD5 Power on whilst holding down EDIT and START/STOP, then press START/STOP again.
ROLAND TD6 Whilst holding SHIFT, press EDIT(SETUP) then CURSOR (>) to FACTORY RESET. Press ENTER then INC/DEC to select ALL, finish by pressing ENTER.
ROLAND TD7 Press SYSTEM. Use the CURSOR keys to select INI and press ENTER. CURSOR to HIHAT and use the DATA DIAL to select ALL. Press ENTER twice.
ROLAND TD8 Press SYSTEM then F3(MENU), use the CURSOR DOWN to select RESET and then press F3 again. Use the VALUE DIAL to select ALL and then press F3 twice.
ROLAND TD-8 V CUSTOM PRESS SETUP THEN [F3 (MENU)]. PRESS INC/+, ROTATE THE VALUE DIAL, OR PRESS CURSOR TO MOVE THE CURSOR TO "RESET".
ROLAND TD-8 V CUSTOM PRESS SETUP THEN [F3 (MENU)]. PRESS INC/+, ROTATE THE VALUE DIAL, OR PRESS CURSOR TO MOVE THE CURSOR TO "RESET".
ROLAND TP20 No ROM Reset
ROLAND TR-505 HOLD PATTERN GROUP A AND MODE AND POWER ON.
ROLAND TR505 Power on whilst holding down MODE and PATTERN KEY GROUP A.
ROLAND TR-626 HOLD TRACK #1 AND MODE AND POWER ON.
ROLAND TR626 Power on whilst holding down MODE and TRACK #1.
ROLAND TR-707 HOLD TRACK WRITE AND PATTERN 1 AND POWER ON.
ROLAND TR707 Power on whilst holding down TRACK WRITE and TRACK #1.
ROLAND TR-727 HOLD TRACK WRITE AND PATTERN 1 AND POWER ON.
ROLAND TR727 Power on whilst holding down TRACK WRITE and TRACK #1.
ROLAND TR808 No ROM Reset
ROLAND TR-909 HOLD TRACK #1 AND PATTERN #1 AND POWER ON.
ROLAND TR909 Power on whilst holding down TRACK #1 and Pattern #1.
ROLAND U-110 HOLD THE EDIT AND PART BUTTONS AND POWER ON.
ROLAND U110 Power on whilst holding down PART and EDIT.
ROLAND U20 No ROM Reset
ROLAND U220 No ROM Reset
ROLAND VA5 Press FUNCTION MENU, then touch GLOBAL PARAMETER. Touch ALL underneath Factory Resume
ROLAND VA7 Press FUNCTION MENU, then touch GLOBAL PARAMETER. Touch ALL underneath Factory Resume
ROLAND VBASS Whilst holding down the PAGE < and PAGE > turn on the power. Press the WRITE button twice.
ROLAND VF1 Press UTILITY, then rotate the VALUE DIAL to display "FACT RESET". Press ENTER three times.
ROLAND VG8 Power on whilst holding down F1, F3 and F5. Then press either (F6:ALL)(F4
ATCHES)(F2
YSTEM).
ROLAND VG88 Power on whilst holding down the PAGE < and PAGE >. Then press WRITE twice.
ROLAND VG8EX Power on whilst holding down F1, F3 and F5. Then press either (F6:ALL)(F4
ATCHES)(F2
YSTEM).
ROLAND VGA7 Power on whilst holding down the WRITE button, FLD ALL will flash in the LED. Press WRITE again to complete the proceedure.
ROLAND VK1000 Press WRITE, then press F3 to access the INIT MENU screen. Press F4 to access the COLD BOOT Scren, then press ENTER.
ROLAND VK7 Power on whilst holding down MAIN, SUB and PEDAL in the HARMONIC BAR PART.
ROLAND VK8 Power on whilst holding down UPPER. LOWER and PEDAL in the HARMONIC BAR PART until all the panel indicators light.
ROLAND VP-70 HOLD MIDI, PLAY, AND VOICE EXP AND POWER ON.
ROLAND VP70 Power on whilst holding down PLAY, VOICE EXPANSION and MIDI.
ROLAND VP9000 Press UTILITY then PART (>) to go to MENU 2. Press F1 (FACTORY) and then F6 (EXEC).
ROLAND VS1680 No ROM Reset
ROLAND VS1680EX No ROM Reset
ROLAND VS1824 No ROM Reset
ROLAND VS1824CD No ROM Reset
ROLAND VS1880 No ROM Reset
ROLAND VS2480 No ROM Reset
ROLAND VS2480CD No ROM Reset
ROLAND VS840 No ROM Reset
ROLAND VS840EX No ROM Reset
ROLAND VS840GX No ROM Reset
ROLAND VS880 No ROM Reset
ROLAND VS880EX No ROM Reset
ROLAND VS890 No ROM Reset
ROLAND VT1 Power on whilst holding down the PRESET/USER button.
ROLAND W30 No ROM Reset
ROLAND W50 Press CONTROL and MASTER simultaneously. Use PARAMETER UP and DOWN to select ALL