[milanceshow]

ROLAND JV-1000 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE.
ROLAND JV1000 Power on whilst holding down the NUMBER 8 button (also labelled PERFORM and CAPS), press ENTER then press WRITE.
ROLAND JV1010 Whilst in PERFORM mode, press the VOLUME KNOB and VALUE KNOB together. Turn the CATEGORY/BANK KNOB to PIANO and press the VALUE KNOB twice.
ROLAND JV-1080 PRESS UTILITY. CURSOR DOWN ONCE THEN RIGHT 3 TIMES TO FACTORY PRESET. PRESS ENTER TWICE, THEN UTILITY.
ROLAND JV1080 Press UTILITY, cursor down once, then cursor right three times to select FACTORY PRESET. Press ENTER twice, then press UTILITY.
ROLAND JV-2080 PRESS UTILITY. PRESS F6 TWICE TO MENU 3. PRESS F1 THEN F6. IF REQ'D USE VALUE DIAL TO TURN OFF MEM. PROT. AND PRESS F6 TWICE.
ROLAND JV2080 Press UTILITY. Press F6 twice to select MENU 3. Press F1 and then F6 (turn the "memory protect" to OFF if necessary using the VALUE DIAL). Press F6 twice.
ROLAND JV-30 PRESS CHORUS + REVERB (ABOVE INIT) TOGETHER THEN PRESS VALUE UP.
ROLAND JV30 Press CHORUS and REVERB (above INITIALIZE) simultaneously. Press VALUE UP.
ROLAND JV-35 PRESS CONTROL + MASTER TOGETHER. USE PARAMETER UP AND DOWN TO SELECT ALL. PRESS VALUE UP.
ROLAND JV35 Press CONTROL and MASTER simultaneously. Press PARAMETER UP or DOWN to select ALL. Press VALUE UP.
ROLAND JV-50 PRESS CONTROL + MASTER TOGETHER. USE PARAMETER UP AND DOWN TO SELECT ALL. PRESS VALUE UP.
ROLAND JV50 Press CONTROL and MASTER simultaneously. Press PARAMETER UP or DOWN to select ALL. Press VALUE UP.
ROLAND JV-80 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE.
ROLAND JV80 Power on whilst holding down the NUMBER 8 button (also labelled PERFORM and CAPS), press ENTER then press WRITE.
ROLAND JV-880 PRESS UTILITY, USE DATA DIAL TO SELECT FACTORY PRESET. PRESS ENTER TWICE.
ROLAND JV880 Press UTILITY, then use the DATA DIAL to select FACTORY PRESET. Press ENTER twice.
ROLAND JV-90 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE.
ROLAND JV90 Power on whilst holding down the NUMBER 8 button (also labelled PERFORM and CAPS), press ENTER then press WRITE.
ROLAND JW-50 PRESS TUNE/FUNCTION. PRESS F5 THEN F4 THEN F3 THEN F4.
ROLAND JW50 Press TUNE/FUNCTION. Press F5 (FACTORY), then F4 (JW RESET), then F3 (GS RESET), then F4 (YES).
ROLAND JX-1 HOLD WRITE AND FLUTE THEN POWER ON.
ROLAND JX1 Power on whilst holding down WRITE and FLUTE.
ROLAND JX-10 no rom reset.
ROLAND JX10 No ROM Reset.
ROLAND JX-3P no rom reset.
ROLAND JX3P No ROM Reset.
ROLAND JX-8P no rom reset.
ROLAND JX8P No ROM Reset.
ROLAND KF90 Press FUNCTION, touch SYSTEM, touch FACTORY RESET, touch EXECUTE, touch OK
ROLAND KR-100 resets at power on.
ROLAND KR100 The unit resets each time you turn it on
ROLAND KR1070 Press FUNCTION and use PAGE buttons until FACTORY RESET is displayed, then tocuh EXECUTE, then touch OK
ROLAND KR177 Press UTILITY, use the PAGE buttons to select FACTORY PRESET and press EXECUTE then OK
ROLAND KR277 Press FUNCTION na duse TEMPO buttons until FNC42 is displayed in the window. Press TRANSPOSE twice
ROLAND KR-3000 HOLD FROM AND TO, THEN PRESS WRITE.
ROLAND KR3000 While holding FROM and TO, press WRITE
ROLAND KR-33 resets at power on.
ROLAND KR33 The unit resets each time you turn it on
ROLAND KR-350 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR350 While holding LOAD and SAVE, press WRITE
ROLAND KR-3500 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR3500 While holding LOAD and SAVE, press WRITE
ROLAND KR-370 resets at power on.
ROLAND KR370 The unit resets each time you turn it on
ROLAND KR375 Press FUNCTION and use TEMPO buttons until FNC42 is displayed in the window. Press TRANSPOSE twice
ROLAND KR377 Press FUNCTION and use PAGE buttons until FACTORY RESET is displayed, then press EXECUTE, then OK
ROLAND KR-4500 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR4500 While holding LOAD and SAVE, press WRITE
ROLAND KR-4700 HOLD LOAD AND EDIT, THEN PRESS SAVE.
ROLAND KR4700 While holding EDIT, press LOAD and SAVE
ROLAND KR-500 HOLD FROM AND TO, THEN PRESS WRITE.
ROLAND KR500 While holding FROM and TO, press WRITE
ROLAND KR-5000 HOLD LOAD AND EDIT, THEN PRESS SAVE.
ROLAND KR5000 While holding EDIT, press LOAD and SAVE
ROLAND KR-55 HOLD MIDI FUNCTION AND PRESS CARDS (5 SECONDS).
ROLAND KR55 Hold MIDI/FUNC and press CARD. Hold both VARIATION buttons for 5 seconds
ROLAND KR-5500 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR5500 While holding LOAD and SAVE, press WRITE
ROLAND KR570 While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons simultaneously.
ROLAND KR575 Press FUNCTION and use PAGE buttons until FACTORY RESET is displayed, then press EXECUTE, then OK
ROLAND KR577 Press FUNCTION and use PAGE buttons until FACTORY RESET is displayed, then touch EXECUTE, then touch OK
ROLAND KR-650 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR650 While holding LOAD and SAVE, press WRITE
ROLAND KR75 Press UTILITY, use the buttons under PAGE to select FACTORY PRESET, press EXECUTE, then OK.
ROLAND KR770 While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons simultaneously.
ROLAND KR977 Press FUNCTION and use PAGE buttons until FACTORY RESET is displayed, then touch EXECUTE, then touch OK