Digitech vocalist ex - YU-MIDI Muzički Portal

Enva26 · 13.05.2015, 02:44

Kako si mi? Sta se radi? objasnicu ti kako se vadi mnogo lako brate.

1 - Pritisnes Utilities dugme
2 - ides na Midi
3 - stisnes Dump
4 - ides Desnu strelicu i pritisnes dvaput
5 - Pritisni Store da DUMP all programs pokazace Dumping znaci u procesu je prebacuje.
Kad zavrsi postojace SYSEX file to samo posaljes u emai: enver2002@aol.com

Evo na Engleski mozda razumijes

1. Press the Utilities button from any mode; this presents the UTILITIES main menu.
2. Press the MIDI softkey; this presents the MIDI Utilities sub-menu. If you are dumping all programs to a sysex librarian, ensure that the librarian is ready to receive a sysex dump.
3. Press the softkey corresponding to Dump.
4. Press the Right Arrow button twice.
5. Press the Store button to dump all programs; the unit will display “Dumping...” while the dump is in progress. When the dump has been transmitted in full, the unit will display “Dumping...completed”. The time required to perform a bulk dump will vary with the number of programs, styles and songs stored in the unit at any given time. Typically, a bulk dump will take about ten seconds to complete.
6. Press the Utilities button once again to exit; this will return you to the mode from which you entered.

13.05.2015, 02:44	#5
Enva26 Početnik forumacije! Registrovan/a dana: 05.05.2005 Postovi: 42 Downloads: 124 Uploads: 0 Rekao HVALA: 4 Zahvalili mu 0 puta u 0 Postova	Ivane druze Kako si mi? Sta se radi? objasnicu ti kako se vadi mnogo lako brate. 1 - Pritisnes Utilities dugme 2 - ides na Midi 3 - stisnes Dump 4 - ides Desnu strelicu i pritisnes dvaput 5 - Pritisni Store da DUMP all programs pokazace Dumping znaci u procesu je prebacuje. Kad zavrsi postojace SYSEX file to samo posaljes u emai: enver2002@aol.com Evo na Engleski mozda razumijes 1. Press the Utilities button from any mode; this presents the UTILITIES main menu. 2. Press the MIDI softkey; this presents the MIDI Utilities sub-menu. If you are dumping all programs to a sysex librarian, ensure that the librarian is ready to receive a sysex dump. 3. Press the softkey corresponding to Dump. 4. Press the Right Arrow button twice. 5. Press the Store button to dump all programs; the unit will display “Dumping...” while the dump is in progress. When the dump has been transmitted in full, the unit will display “Dumping...completed”. The time required to perform a bulk dump will vary with the number of programs, styles and songs stored in the unit at any given time. Typically, a bulk dump will take about ten seconds to complete. 6. Press the Utilities button once again to exit; this will return you to the mode from which you entered.