PA Instrukcije, za one koje znaju Engleski!

[BasariStudios]

Copying FX:
Go to Menu, click FX, choose the effect you wanna copy, then go to the ARROW on top and click
COPY, after that, go to WHEREVER you wanna paste the effect, choose the desired loaction of
A,B,C,D and then go on ARROW again and click PASTE...DONE!

[BasariStudios]

A tip about FX:
When trying to get more then 2 FX per SOUND its easy to achieve that depending on the FX you
want. On the PA800 after the 80eth or 90eth effect there is a bundle of COMBINATION effects
like Compressor, Faser, or Phlanger or Distortion and WAH WAH and else FX in COMBINATION
with a REVERB or DELAY thuswill give you in certain cases even 4 FULL FX a single SOUND or
PERFORMANCE. The COMBINATION FX have FULL editors meaning that in the editor of both FX
both FX are treated separetrly with all of the parameters as a single effect available, ROUTING
and also a separate AMOUNT/WET/DRY parameter.

[BasariStudios]

Combining Sets:
Step 1:
1. Open SET 1, check it out and find out what you want, write down each style, each perf and sound.
2. For each style write down which DRUM KIT and which USER SOUND it uses and that means on
what track in the style it is,on what location in the User bank it is.
3. For each performance write down which User Sound the performance uses.
4. Do exactly the same with SET 2.
Step 2:
1. Go to Sound Mode then hit record and enter SAMPLING. Click the arrow and choose DELETE.
Delete all samples, multisamples and user drum kits, in Sampling Info check for everything to be 0.
2. Go to MEDIA MODE and go to ERASE, on the POP UP menu choose USER SSD and in there in
each folder delete everything.Start with Performances, then Pads, then Sounds, then User Drum Kits.
3. Start LOADing ONLY the Styles that you wrote down, one by one in one bank or whatever.
4. Start LOADing ONLY the Performances you wrote down, same as Styles.
5. Start LOADing the USER DRUM KITS as you wrote them down, one by one, they will LOAD their
own samples, you dont haveto do anything in sampling mode, just keep loading one by one.
6. Do the same with USER SOUND...exactly the same as LOADing the USER STYLES.
Step 3:
1. Open the BOOK that you wrote:
2. Go to Style Mode then choose the first style then hit RECORD then you are in Style Record Mode
and in there hit MENU and choose Style Elements.
3. In here start to assign each DrumKit to its place and also each User Sounds that was used in that
style. Do that for eachStyle Element, in here if you press VAR or any other element the programs will
change, you have to check for each VAR,FILL, INTRO.
4. After you do that and it sounds ok to you press the ARROW on top and hit SAVE, SAVE that style.
Hit Record again and get out of there...you have to do that for each style.
5. Sellect each Performance and in the 3 Upper tracks start assigning the User Sounds they use.
6. Choose Media, go to Save, choose ALL, NEW SET, rename it, hit OK, check ALL of the BOXes and SAVE!