FANTOM XA ubacivanje seta

[opo]

pozdrav ljudi,postavljao sam ovakva pitanja na forum ali nikako da odgovor dobijem pa rekoh da i ovdje upitam ,moze li mo iko objasniti proceduru na koji nacin da ubacim set u fantom xa ,mislim na semplove,npr.skino sam kosmajac set ali ja pojma nemam kako da to uradim da mi svira na klavijaturi,nemam knjigu od njega a nisam neki ni englez da bi to skontao iz knjige kad je na engleskom j. ......molim nekoga da mi to objasni,imam tu klavijaturu uz pa1xpro a nikad je ne koristim jer fakat neznam da koristim ni jednu solo klavijaturu .....HVALA UNAPRIJED!!!!!!!!!!!

[harmonika]

Kad zelis da prebacis set u Fantom xa moras da imas Ram-memorije u sintu,zatim da imas Flash-karticu i set sa semplovanim bojama(npr. harmonike), a mozes da ubacujes pojedinacno semplove u Wav-formatu(znaci da ubacis dobar dobos,bongose ili komplet tonove od neke dobre harmonike),zatim da za svaki ton uradis Loop,normalize,itd.I na kraju zapises kao svoju boju sa efektima(reverb,eq,kompresor itd).
Upustvo kako da to uradis mozes naci na netu, napisi Roland Fantom Xa i
naci ces mnogo toga.
Ja sam imao Fantom Xa prije 2-3 god. ali sam prodao, samo ti mogu reci
ako zelis da je koristis kao solo-sint ( kao kod tebe u kombinaciji sa Korg Pa1) ta kombinacija je MRAK.
Kad ubacujes set u Fantom Xa MORAS BITI SIGURAN DA JE OD Fantom Xa . I neka je sa srecom drug moj!

[opo]

joj druze ja sam ti truba za te stvari,znam da je to super kombinacija ali meni je sad taj fantom bezvrijedan jer neznam kako da to sve odradim,probao sam sa onim setom kosmajac ali jbga kad neznam a nema mi ko ni pokazati,postoji li mogucnost da se negdje na netu nadjemo pa da probamo skupa ubaciti neke boje u njega,jedino me to spasava? POzzzzzz

@ opo

Nije stos otvoriti istu temu na sto vise mesta da bi dobio odgovor...budi malo strpljiv i sacekaj odgovor...

...mozes za to vreme malo procitati http://www.yu-midi.com/forum/faq.php sa posebnim osvrtom na tacku 2 i tacku 7...hvala

[harmonika]

POSTUPAK UBACIVANJA SEMPLOVA U ROLAND FANTOM Xa

PRIJE NEGO STO POCNES MORAS DA SI SIGURAN DA IMAS DOVOLJNO RAMA U SINTU I DA IMAS COMPACT FLASH KARTICU U SINTU (ZA KARTICU TI TREBA "PCMCIA to Compact Flash" adaptor !!!)


Loading samples
• Connect your synthesizer to your computer with a USB cable.
• Enter the USB storage mode:
• Fantom-X: switch to USB storage mode in [MENU] ・ｨ "System" ・ｨ "USB", then
go to [MENU] ・ｨ "USB storage".
• Select the "User" or "Card" area, depending on where you want to load the samples.
• On your computer, you will see a new removable drive which represents the User or
Card flash memory area of the synthesizer.
• Using your computer, copy the desired sample files to the /TMP/AUDIO_IMPORT
folder of the synthesizer's drive:
• Eject the removable drive using the options menu of the drive icon on your computer.
• Exit the USB mode on the synthesizer.
• If needed, disconnect the USB cable from the computer.
• Go to the sample list:
• Fantom-S and Fantom-X: press [Sample List].
• Press [MENU] ・ｨ "Import Audio".
• Mark the samples you want to import and press "Import".
• Save the samples to the storage memory:
• Fantom-S and Fantom-X: press [SAVE/LOAD] ・ｨ "Save All Samples".
• Now you may use the "File Utility" (accessible via MENU) or your computer to delete
the original samples from the /TMP/AUDIO_IMPORT folder.

1.1 What sort of RAM should I buy for my Fantom?
You should use PC100 or PC133 RAM DIMMS of the following spec:
Package: 168-pin DIMM
Feature: SDRAM, PC100 or PC133
DIMM Type: Unbuffered
Error Checking: Non-parity or Non-ECC
Speed: 100 or 133MHz
Voltage: 3.3V
Although the PC100 and PC133 formats are now quite old, you should still be able to purchase these modules from most good computer component retailers. The Fantom-S series keyboards support DIMMs up to 256Mb capacity, whereas the Fantom-X series keyboards and XR rack support DIMMs up to 512Mb in size. Whilst we don't specifically endorse these particular items or brands, for your convenience we are providing these links to suitable items from a selection of manufacturers


1.2 What sort of a storage card should I buy for my Fantom-X?
The Fantom-X series has a type II PCMCIA slot to accept memory cards. Whilst you can buy PCMCIA memory cards, they are both very rare and very expensive. The recommended solution is to buy a "PCMCIA to Compact Flash" adaptor plus a Compact Flash memory card of suitable size. Roland officially guarantees memory cards up to 1 GB to work with the Fantom, however, up to 2.2 GB Compact Flash form factor Microdrives are reported to work well.
The following adaptor and Compact Flash cards are known to work:

Prijatelju moras da se potrudis da ovo "skontas" jbga!
Pozdrav

Ja ovde vidim da se pominje Fantom S i X a od XA ni traga ni glasa...osim što si ga ti pomenuo u naslovu?

[josipv]

Ha ha...to je Roland...
Ni ja ne kuzim ta rutanja efektima,to je strasno....

[srdjan motif]

Pozdrav kolege da ne bi otvarao novu temu hteo sam pitati jel postoji mogucnost da se Prebaci set od G6 na XA preko Yase Programa

Sent from my SM-A520F using Tapatalk

[nikadvisekorg]

Ne može ceo set, ali sempl po ssmpl može, ja sam vadio tako iz seta od g6 dok sam imao xa....

Послато са MI 6X уз помоћ Тапатока

[srdjan motif]

Originalno postovano od nikadvisekorg

Ne može ceo set, ali sempl po ssmpl može, ja sam vadio tako iz seta od g6 dok sam imao xa....

Послато са MI 6X уз помоћ Тапатока

a gde da skinem drajver za njega nece da mi otvori na kompijuteru a na njihovom sajtu imaju za Win Vista Xp i te starije verzije