Korisničko Ime
Lozinka
Registracija
YU-MIDI Marketing


Nazad   YU-MIDI Muzički Portal - Muzičarski forum > Klavijature > Ostalo > Servis klavijatura - uradi sam

Servis klavijatura - uradi sam Savjeti oko popravka, čišćenja, izmena dirki, mikroprekidača, napajanja i sl.

Odgovor
 
Alati tema Display Modes
Star 03.02.2009, 23:31   #1
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 82 puta u 68 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard RESET klavijatura i vasih uredjaja!!!!

Evo kako mozete da resetujete svoj uredjaj.
Ovde je spisak uredjaja!!!!!!


PAZNJA!!!!!!!Prvo uradite BACKUP!!!!!!!!

ALESIS QUADRAVERB HOLD BYPASS AND PROGRAM THEN POWER ON. Database price guide manufacturer match, click here
ALESIS SR-16 HOLD PLAY AND ERASE THEN POWER ON. Database price guide manufacturer match, click here
ART BCC HOLD STORE, PARAMETER, AND VALUE BUTTONS + POWER ON. Database price guide manufacturer match, click here
ART ECC HOLD STORE, PARAMETER, AND VALUE BUTTONS + POWER ON. Database price guide manufacturer match, click here
ART PRO GATE PRESS BYPASS, 8, AND SELECT SIMULTANEOUSLY. Database price guide manufacturer match, click here
ART PROVERB no reset. remove battery for more than 5 hours. Database price guide manufacturer match, click here
ART PROVERB 200 no reset. remove battery for more than 5 hours. Database price guide manufacturer match, click here
ART SGE HOLD PRESET DOWN, ADD EFFECT, AND MIDI/UTILITY WHILE POWERING ON. Database price guide manufacturer match, click here
DIGITECH DHP 33 PRESS UTILITY BUTTON, SCROLL TO THE FACTORY RESTORE MENU, TURN EITHER DATA KNOB COUNTER-CLOCKWISE, THEN PRESS STORE.
DIGITECH DHP 55 PRESS UTILITY BUTTON, SCROLL TO THE FACTORY RESTORE MENU, PRESS PARAMETER EDIT, THEN LOAD.
DIGITECH DSP 128 HOLD PARAMETER EFFECT AND SELECT, THEN POWER ON.
DIGITECH DSP 128+ HOLD PARAMETER DOWN AND LEFT, THEN POWER ON.
DIGITECH DSP 256 HOLD UTILITY, POWER ON, THEN PRESS PARAMETER UP.
DIGITECH DSP 256XL HOLD UTILITY, POWER ON, THEN PRESS PARAMETER UP.
DIGITECH FX 7 PRESS/HOLD STORE, POWER ON, WAIT UNTIL "RS" APPEARS IN THE DISPLAY THEN RELEASE STORE.
DIGITECH G7 PRESS AND HOLD PROGRAM, POWER ON THEN PRESS THE STORE BUTTON.
DIGITECH GFX 1 HOLD UTILITY BUTTON, POWER ON, THEN PRESS PARAMETER UP.
DIGITECH GSP 21 HOLD TITLE BUTTON, POWER ON.
DIGITECH GSP 21 LEGEND HOLD UTILITY BUTTON, POWER ON, THEN PRESS PARAMETER UP.
DIGITECH GSP 21 PRO HOLD UTILITY BUTTON, POWER ON, THEN PRESS PARAMETER UP.
DIGITECH GSP 2112 HOLD THE PREAMP BUTTON, POWER ON. WHEN THE ASTERISK APPEARS IN THE TOP OF THE DISPLAY, PRESS THE MOD BUTTON.
DIGITECH GSP 5 HOLD PARAMETER DOWN THEN POWER ON.
DIGITECH GSP 7 HOLD UTILITY BUTTON, POWER ON, THEN PRESS PARAMETER UP.
DIGITECH GSP2101 HOLD ACCESS 1 BUTTON, POWER ON. AFTER * APPEARS IN THE UPPER LEFT OF THE LCD PRESS PROGRAM UP
DIGITECH IPS 33 HOLD BOTH FUNCTION SELECT BUTTONS THEN POWER ON.
DIGITECH IPS 33B PRESS UTILITY BUTTON, SCROLL TO THE FACTORY RESTORE MENU, PRESS PARAMETER DOWN, THEN STORE.
DIGITECH LEGEND II HOLD STORE, POWER ON. AFTER * APPEARS IN THE UPPER LEFT CORNER OF THE LCD PRESS PARAMETER UP.
DIGITECH MEQ 14 HOLD PROGRAM BUTTON THEN POWER ON.
DIGITECH MEQ 28 HOLD PROGRAM BUTTON THEN POWER ON.
DIGITECH MEQ 7 HOLD PROGRAM BUTTON THEN POWER ON.
DIGITECH MSP 4 HOLD THE DOWN AND LEFT BUTTONS THEN POWER ON.
DIGITECH PMC 10 PRESS AND HOLD FOOTSWITCH "ONE", POWER ON, THEN PRESS THE "SELECT" FOOTSWITCH.
DIGITECH RP 1 HOLD UTILITY BUTTON, POWER ON, THEN PRESS PARAMETER UP.
DIGITECH RP 10 HOLD NAME, POWER ON. AFTER * APPEARS IN THE UPPER LEFT CORNER OF LCD PRESS PROGRAM UP.
DIGITECH RP 12 HOLD NAME, POWER ON. AFTER * APPEARS IN THE UPPER LEFT CORNER OF LCD PRESS PROGRAM UP.
DIGITECH RP 5 HOLD PARAMETER SELECT UP BUTTON THEN POWER ON.
DIGITECH RP 6 HOLD PARAMETER SELECT UP BUTTON THEN POWER ON.
DIGITECH S-5000 PRESS UTILITY BUTTON, SCROLL TO THE FACTORY RESTORE MENU, PRESS PARAMETER EDIT, THEN LOAD.
DIGITECH STUDIO 400 PRESS AND HOLD THE "1" BUTTON, POWER ON. WHEN THE ASTERISK APPEARS IN THE TOP OF THE DISPLAY, PRESS PROGRAM.
DIGITECH STUDIO QUAD PRESS AND HOLD THE "1" BUTTON, POWER ON. WHEN THE ASTERISK APPEARS IN THE TOP OF THE DISPLAY, PRESS PROGRAM.
DIGITECH SV 5 PRESS UTILITY BUTTON, SELECT THE INIT MENU, PRESS THE STORE BUTTON TWICE (AS PROMPTED).
DIGITECH TEC 8 PRESS AND HOLD BOTH LOW EQ AND MID EQ, POWER ON.
DIGITECH TSR 12 HOLD NAME + POWER ON. AFTER * APPEARS IN THE UPPER LEFT CORNER OF LCD PRESS PROGRAM UP.
DIGITECH TSR 24 HOLD ACCESS 1 BUTTON, POWER ON. AFTER * APPEARS IN THE UPPER LEFT OF THE LCD PRESS PROGRAM UP.
DIGITECH TSR 6 PRESS AND HOLD EQ BUTTON, POWER ON. WAIT FOR "FA" TO APPEAR IN THE DISPLAY THEN PRESS STORE. NOTE: "FH" WILL APPEAR BRIEFLY TO ACKNOWLEDGE.
DIGITECH VALVE FX HOLD STORE, POWER ON. AFTER * APPEARS IN THE UPPER LEFT CORNER OF LCD PRESS PARAMETER UP.
DIGITECH VHM 5 PRESS UTILITY BUTTON, SCROLL TO THE FACTORY RESTORE MENU, PRESS PARAMETER DOWN, THEN STORE.
DIGITECH VOCALIST II PRESS UTILITY BUTTON, SCROLL TO THE FACTORY RESTORE MENU, PRESS PARAMETER DOWN, THEN STORE.
DIGITECH XP PEDALS PRESS/HOLD THE BYPASS/(HOLD)TUNER FOOTSWITCH AND POWER ON.
ENSONIQ DP2 HOLD SYSTEM/MIDI AND PRESS THE "B" BUTTON, THEN RELEASE BOTH. PRESS RIGHT ARROW ONCE. PRESS WRITE BUTTON AT PROMPT.
ENSONIQ DP4 HOLD SYSTEM/MIDI AND PRESS THE "B" BUTTON, THEN RELEASE BOTH. PRESS RIGHT ARROW ONCE. PRESS WRITE BUTTON AT PROMPT.
ENSONIQ DP4+ HOLD SYSTEM/MIDI AND PRESS THE "B" BUTTON, THEN RELEASE BOTH. PRESS RIGHT ARROW ONCE. PRESS WRITE BUTTON AT PROMPT.
ENSONIQ DP-PRO HOLD SYSTEM BUTTON AND PRESS CANCEL. RELEASE BOTH BUTTONS, PRESS ENTER.
ENSONIQ ESQ-M PRESS PARAM, PRESS STORAGE. HOLD SCROLL, PRESS MASTER. RELEASE BOTH, SCROLL TO SELECT MEMORY PRESET PAGE. HOLD SCROLL, PRESS STORAGE. RELEASE BOTH, PRESS ( [ ).
ENSONIQ FIZMO HOLD THE SAVE BUTTON AND PRESS COMPARE. PRESS THE YES BUTTON AT THE PROMPT.
ENSONIQ FIZMO RACK HOLD THE SAVE BUTTON AND PRESS COMPARE. PRESS THE YES BUTTON AT THE PROMPT.
ENSONIQ KS-32 PRESS EDIT/SEQUENCES (PRESETS). PRESS AND HOLD BANK 9 (SYSTEM) AND THEN PRESS SCREEN 9. RELEASE BOTH AND PRESS YES AT THE PROMPT.
ENSONIQ KT-76 PRESS EDIT/SEQUENCES (PRESETS). PRESS AND HOLD THE UPPER 9 BUTTON AND THEN PRESS THE LOWER 9.RELEASE BOTH AND PRESS YES AT THE PROMPT.
ENSONIQ KT-88 PRESS EDIT/SEQUENCES (PRESETS). PRESS AND HOLD THE UPPER 9 BUTTON AND THEN PRESS THE LOWER 9.RELEASE BOTH AND PRESS YES AT THE PROMPT.
ENSONIQ MR-61/76 HOLD THE ERASE BUTTON (IN THE SONG EDITOR SECTION) AND POWER ON.
ENSONIQ MR-RACK HOLD SAVE AND PRESS ENTER, THEN PRESS ENTER AT THE PROMPT.
ENSONIQ SD-1 HOLD PRESET BUTTON AND PRESS SOFT #1 BUTTON (UPPER LEFT CORNER OF SCREEN). RELEASE BOTH, PRESS YES AT THE PROMPT.
ENSONIQ SQ-1 ( 21 VOICE ) PRESS EDIT/SEQUENCES (PRESETS). PRESS AND HOLD BANK 9 (SYSTEM) AND THEN PRESS SCREEN 9. RELEASE BOTH AND PRESS YES AT THE PROMPT.
ENSONIQ SQ-1/32 PRESS EDIT/SEQUENCES (PRESETS). PRESS AND HOLD BANK 9 (SYSTEM) AND THEN PRESS SCREEN 9. RELEASE BOTH AND PRESS YES AT THE PROMPT.
ENSONIQ SQ-2 ( 21 VOICE ) PRESS EDIT/SEQUENCES (PRESETS). PRESS AND HOLD BANK 9 (SYSTEM) AND THEN PRESS SCREEN 9. RELEASE BOTH AND PRESS YES AT THE PROMPT.
ENSONIQ SQ-2/32 PRESS EDIT/SEQUENCES (PRESETS). PRESS AND HOLD BANK 9 (SYSTEM) AND THEN PRESS SCREEN 9. RELEASE BOTH AND PRESS YES AT THE PROMPT.
ENSONIQ SQ-80 HOLD THE RECORD BUTTON AND PRESS THE #1 SOFT BUTTON (UPPER LEFT CORNER OF SCREEN). RELEASE BOTH BUTTONS, PRESS YES AT THE PROMPT.
ENSONIQ SQ-R HOLD SYSTEM BUTTON. QUICKLY PRESS "NO" THEN RELEASE BOTH BUTTONS. PRESS YES AT PROMPT.
ENSONIQ TS-10 HOLD PRESETS BUTTON AND PRESS SOFT 1 BUTTON (UPPER LEFT CORNER OF DISPLAY). RELEASE BOTH BUTTONS. SELECT YES AT THE PROMPT.
ENSONIQ TS-12 HOLD PRESETS BUTTON AND PRESS SOFT 1 BUTTON (UPPER LEFT CORNER OF DISPLAY). RELEASE BOTH BUTTONS. SELECT YES AT THE PROMPT.
ENSONIQ VFX HOLD PRESETS BUTTON, PRESS SOFT 1 BUTTON (UPPER LEFT CORNER OF SCREEN). SELECT YES AT PROMPT.
ENSONIQ VFX/SD HOLD PRESET BUTTON AND PRESS SOFT #1 BUTTON (UPPER LEFT CORNER OF SCREEN). RELEASE BOTH, PRESS YES AT THE PROMPT.
ENSONIQ ZR-76 HOLD THE ERASE BUTTON (IN THE SONG EDITOR SECTION) AND POWER ON.

Promijenjeno od milanceshow (03.02.2009 u 23:45 sati)
milanceshow je offline   Reply With Quote
Star 03.02.2009, 23:32   #2
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 82 puta u 68 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

Korg 01w hold reset and compare then power on.
Korg 01wfd hold reset and compare then power on.
Korg a1 hold write and -1 then power on.
Korg a2 hold down arrow and up arrow, power on, press "e" (yes).
Korg a3 hold down arrow and up arrow, power on, press "e" (yes).
Korg a4 hold write and bypass, then power on.
Korg am8000-r hold fx1 and fx2 then power on.
Korg c-505 midi/transpose + split and restart unit.
Korg ddd-1 hold yes and no, then power on.
Korg dl8000-r hold "ms/d" and "hold", then power on.
Korg ds-8/707 hold up and down, then power on.
Korg i1 hold program and disk, then power on.
Korg i2 hold arr play and edit style then power on.
Korg i3 hold arr play and edit style then power on.
Korg i30 hold arrange play and global, then power on.
Korg i4s hold arr. Play and program, then power on.
Korg i5m hold arr. Play and global, then power on.
Korg i5s hold arr. Play and global, then power on.
Korg ih hold detune and bass, then power on.
Korg is40/50/i40m hold arr. Play and global, then power on.
Korg karma hold enter and 0, then power on.
Korg m1 hold int, card, and combi then power on.
Korg m1r hold int, prog, and combi then power on.
Korg m3r page 5d of global mode.
Korg n264 hold enter and 7, then power on.
Korg n364 hold enter and 7, then power on.
Korg o5rw hold +1 and -1 then power on.
Korg sg-prox hold program and piano 1, then power on.
Korg sg-rack hold edit and a4, then power on.
Korg t series hold lower keypad 0 and prog a, power on, and then immediately turn off.
Korg triton hold enter and 0, then power on.
Korg triton rack hold enter and 0, then power on.
Korg tr-rack hold edit and a4, then power on.
Korg x3 hold enter and cursor down then power on.
Korg x3r hold enter and cursor down then power on.
Korg x5 hold +1 and -1, then power on.
Korg x5d hold +1 and -1 then power on.
Korg x5dr hold +1 and -1 then power on.
Korg z1 hold sw1 and sw2, then power on.
Korg z1ex hold sw1 and sw2, then power on.
Oberheim matrix-6 hold store while powering on.
Peavey addverb hold the - and 5 keys then power on.
Peavey addverb ii hold the - and 5 keys then power on.
Peavey addverb iii hold the add/del and global buttons, power on.
Peavey aeq 2800 hold the midi and assign keys then power on.
Peavey autograph hold the midi and assign keys then power on.
Peavey bassfex hold the play and global buttons then power on.
Peavey ceq 28 hold the midi and assign keys then power on.
Peavey cex 4 hold the master and store/memory buttons then power on.
Peavey cex 4l hold the master and store/memory buttons then power on.
Peavey cyberbass (module) hold the program and right cursor buttons then power on.
Peavey dpm 2 hold 0 button, press enter. Release both buttons and press enter.
Peavey dpm 4 hold save button, press pause. Press enter when prompted.
Peavey dpm c8 hold the 0 and enter buttons, power on, wait forthe "unit initialized" display then release the buttons.
Peavey dpm c8p hold the 0 and copy buttons, power on, wait for the "unit initialized" display then release the buttons.
Peavey dsr 1000 hold the - and 5 keys then power on.
Peavey librarian hold load, save, and util buttons and power on.
Peavey map 8x4 hold bypass + power while plugging unit in.
Peavey mfp 2128/midi mana hold + and - keys then power on.
Peavey midi manager hold + and - keys then power on.
Peavey midi master hold function and proc a keys then power on.
Peavey midi master ii hold function and proc a keys then power on.
Peavey midi streamer hold the record (sysx, samp, + seq) keys and power on. At prompt press start to re-init.
Peavey multifex hold the 2 keys next to display and power on.
Peavey pc 1600 hold the utility + enter keys and power on.
Peavey pc4-x hold the master + midi keys and power on.
Peavey pc4-xl hold the master + midi keys and power on.
Peavey pgp 20 hold the a/b + mute keys and power on.
Peavey plm 8128 press two right-most soft keys in bottom row and power on. (vca cal unaffected)
peavey plm 8128e hold the solo and mute keys, power on. (vca cal unaffected)
peavey profex hold the play and midi keys then power on.
Peavey profex ii hold the play and global buttons, power on.
Peavey programax hold the a/b and mute keys then power on.
Peavey pv lite 3000 factory presets: Hold chase + auto sound, power on. Hard reset: Hold down + store, power on. In both cases, hold until 00 appears in the display.
Peavey sdr 20/20 hold the play and store keys then power on.
Peavey spectrum analog fi hold the dec and exec buttons, power on. ( to init. For use w/ cyberbass, hold dec and bypass then power on.
Peavey spectrum bass ii hold the + and - buttons then power on.
Peavey spectrum organ hold the + and - buttons then power on.
Peavey spectrum synth hold the + and - buttons then power on.
Peavey ultraverb hold the - and 5 keys then power on.
Peavey ultraverb ii hold the + and 9 buttons then power on.
milanceshow je offline   Reply With Quote
Sledeći član vam se zahvalio milanceshow za ovaj koristan post:
korgg (29.04.2012)
Star 03.02.2009, 23:33   #3
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 82 puta u 68 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

ROLAND A-220 HOLD B AND MEMORY THEN POWER ON.
ROLAND A220 Power on whilst holding down the B and MEMORY buttons.
ROLAND A-30 WRITE + POWER ON (15 SECONDS)
ROLAND A30 Power on whilst holding down WRITE. (Hold For 15 seconds.)
ROLAND A-33 WRITE + POWER ON (15 SECONDS)
ROLAND A33 Power on whilst holding down WRITE. (Hold For 15 seconds.)
ROLAND A37 Power on whilst holding down the WRITE button, the display will scroll FACTORY SETUP when completed.
ROLAND A-50 HOLD 1ST+3RD+4TH BUTTONS UNDER DISPLAY, PRESS CHANNEL, THEN PRESS ANY CURSOR KEY.
ROLAND A50 Whilst holding down the 1st, 3rd and 4th buttons under the display, press CHANNEL. Then press any CURSOR button.
ROLAND A-80 HOLD 1ST+3RD+4TH BUTTONS UNDER DISPLAY, PRESS CHANNEL, THEN PRESS ANY CURSOR KEY.
ROLAND A80 Whilst holding down the 1st, 3rd and 4th buttons under the display, press CHANNEL. Then press any CURSOR button.
ROLAND A-880 HOLD SIGNAL AND MEMORY THEN POWER ON.
ROLAND A880 Power on whilst holding down the SIGNAL and MEMORY buttons.
ROLAND A-90 HOLD EDIT, POWER ON THEN PRESS ENTER. WITH VOICE EXPANDER BOARD: HOLD MANUAL, POWER ON, THEN PRESS ENTER.
ROLAND A90 Power on whilst holding down the EDIT button, then press ENTER.
ROLAND A90EX Power on whilst holding down the MANUAL button, then press ENTER.
ROLAND ADA-8024 no rom reset.
ROLAND ADA-8024 No ROM Reset.
ROLAND ALPHA JUNO 1 No ROM Reset.
ROLAND ALPHA JUNO 2 No ROM Reset.
ROLAND ALPHA JUNO-1 no rom reset.
ROLAND ALPHA JUNO-2 no rom reset.
ROLAND AP-700 PWR ON, EXIT REPEATEDLY TO ANALYZER/FILTER SCREEN. CURSOR TO: MENU + ENTER, SYSTEM + ENTER, INIT + ENTER. USE VALUE SELECT ALL THEN EXEC + ENTER TWICE.
ROLAND AP700 Power on, then press EXIT until you get the ANALYZER/FILTER screen. Cursor to MENU and press ENTER. Then cursor to SYSTEM and press ENTER and then cursor to INITALIZE and press ENTER. Use the VALUE DIAL to select ALL, select EXEC and press ENTER twice.
ROLAND AR SERIES no rom reset.
ROLAND AR100 No ROM Reset.
ROLAND AR2000 No ROM Reset.
ROLAND AT Power on while holding ONE TOUCH PROGRAM
ROLAND AT SERIES ONE TOUCH PROGRAM + POWER ON.
ROLAND AT SERIES ONE TOUCH PROGRAM + POWER ON.
ROLAND AX-1 WRITE + POWER ON (30 SECONDS).
ROLAND AX1 Power on whilst holding down WRITE. (Hold For 30 seconds.)
ROLAND AX7 Power on whilst holding down the WRITE button, the display will scroll FACTORY SETUP when completed.
ROLAND AXIS-1 HOLD FUNCTION; PRESS F#0, C#2, AND D#2 KEYS.
ROLAND AXIS1 Whilst holding down the FUNCTION button, press the F#0, C#2, and D#2 keys.
ROLAND BR1180 No ROM Reset
ROLAND BR1180CD No ROM Reset
ROLAND BR532 No ROM Reset
ROLAND BR8 No ROM Reset.
ROLAND CA-30 RESETS EVERY TIME TOGGLED OF AND THEN ON.
ROLAND CA30 The CR-30 resets every time you turn it off and then back on.
ROLAND CDX1 Press UTILITY. Cursor RIGHT > to select INIT and press ENTER. Cursor < or > to select GLOBAL and press ENTER three times.
ROLAND CR ( ALL OTHER) no rom reset.
ROLAND CR-80 DEL + REPEAT + POWER ON, THEN PRESS ENTER.
ROLAND CR80 Power on whilst holding down the DEL and REPEAT buttons, then press the ENTER button.
ROLAND CSQ SERIES no rom reset. {*}
ROLAND D-10 no rom reset. {*}
ROLAND D10 No ROM Reset.
ROLAND D-110 no rom reset. {*}
ROLAND D110 No ROM Reset.
ROLAND D2 Whilst holding down WRITE, press SYSTEM. Then press ENTER twice.
ROLAND D-20 no rom reset. {*}
ROLAND D20 No ROM Reset.
ROLAND D-5 no rom reset. {*}
ROLAND D5 No ROM Reset.
ROLAND D-50 TUNE/FUNCTION AND MIDI DATA INIT: HOLD 0 AND DATA TRANSFER, POWER ON. PATCH + REVERB MUST BE LOADED FROM CARD OR SYSEX FILE.
ROLAND D50 No ROM Reset.
ROLAND D-550 TUNE/FUNCTION AND MIDI DATA INIT: HOLD PATCH BANK 2, PATCH NUMBER6, AND ENTER, POWER ON. PATCH AND REVERD DATA MUST BE LOADED FROM CARD OR SYSEX FILE.
ROLAND D550 No ROM Reset.
ROLAND D-70 no rom reset. {*}
ROLAND D70 No ROM Reset.
ROLAND DDR-30 HOLD #1 BUTTON + POWER ON.
ROLAND DDR30 Power on whilst holding down the #1 button.
ROLAND DEP-3 MEMORY NO UP AND DOWN + POWER ON.
ROLAND DEP3 Power on whilst holding down the MERMORY NO UP and DOWN buttons.
ROLAND DEP-5 MEMORY NO UP AND DOWN + POWER ON.
ROLAND DEP5 Power on whilst holding down the MERMORY NO UP and DOWN buttons.
ROLAND DJ-70 no rom reset.
ROLAND DJ70 No ROM Reset.
ROLAND DJ-70MKII no rom reset.
ROLAND DJ70MKII No ROM Reset.
ROLAND DM SERIES no rom reset.
ROLAND DM80 No ROM Reset.
ROLAND DM800 No ROM Reset.
ROLAND DR202 Power on whilst holding down MUTE and ROLL. Use the VALUE DIAL to select ALL and press TAP/ENTER twice.
ROLAND DR-5 FRET LEFT + FRET RIGHT + POWER ON; 2 X ENTER.
ROLAND DR5 Power on whilst holding down the FRET LEFT (<) and RIGHT (>) buttons, then press ENTER twice.
ROLAND DR-550 HOLD -1 AND +1 AND POWER ON, THEN PRESS START.
ROLAND DR550 Power on whilst holding down the -1 and +1 buttons, then press the START button.
ROLAND DR-550MKII HOLD -1 AND +1 AND POWER ON, THEN PRESS START.
ROLAND DR550MKII Power on whilst holding down the -1 and +1 buttons, then press the START button.
ROLAND DR-660 UTILITY THEN CURSOR TO SELECT (8) INIT; 2 X ENTER.
ROLAND DR660 Press UTILITY, then use LEFT (<) and RIGHT (>) to select [8] INIT. Press the ENTER button twice.
ROLAND DR670 Power on whilst holding down the REC and STOP/CONT buttons, then press ENTER twice.
ROLAND DR770 Press UTILITY then CURSOR (>) to 9.F.RST. Use the VALUE DIAL to select ALL and press ENTER twice.
ROLAND DS-330 REVERB + SPLIT + PWR ON; PRESS YES.
ROLAND DS330 Power on whilst holding down REVERB and SPLIT, then press the YES button.
milanceshow je offline   Reply With Quote
Star 03.02.2009, 23:35   #4
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 82 puta u 68 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

ROLAND E-10 HOLD WRITE + POWER ON.
ROLAND E10 Power on while holding WRITE
ROLAND E-12 no rom reset.
ROLAND E12 No reset
ROLAND E14 The unit resets each time you turn it on
ROLAND E-14US no rom reset.
ROLAND E-15 resets at power on.
ROLAND E15 The unit resets each time you turn it on
ROLAND E-16 resets at power on.
ROLAND E16 The unit resets each time you turn it on
ROLAND E-20 HOLD WRITE + POWER ON.
ROLAND E20 Power on while holding WRITE
ROLAND E28 The unit resets each time you turn it on
ROLAND E-28US resets at power on.
ROLAND E-30 HOLD WRITE + POWER ON.
ROLAND E30 Power on while holding WRITE
ROLAND E300 Press UTILITY, use the buttons under PAGE to select FACTORY PRESET press EXECUTE, then OK.
ROLAND E-35 HOLD REC/PUNCH IN + POWER ON.
ROLAND E35 Power on while holding REC/PUNCH IN
ROLAND E-36 RECORDER + POWER ON.
ROLAND E36 Power on while holding RECORDER
ROLAND E38 The unit resets each time you turn it on
ROLAND E-5 no rom reset.
ROLAND E5 No reset
ROLAND E500 Press UTILITY, use the buttons under PAGE to select FACTORY PRESET press EXECUTE, then OK.
ROLAND E-56 HOLD WRITE + POWER ON.
ROLAND E56 Power on while holding WRITE
ROLAND E600 Pres FUNCTION, use the PAGE buttons so the screen reads FACTORY PRESET, then tocuh EXECTUE
ROLAND E-66 RECORD (IN DISK RECORDER SECTION) + POWER ON.
ROLAND E66 Power on while holding REC
ROLAND E-68US HOLD WRITE + POWER ON.
ROLAND E-70 HOLD WRITE + POWER ON.
ROLAND E70 Power on while holding WRITE
ROLAND E-86 HOLD WRITE + POWER ON.
ROLAND E86 Power on while holding WRITE
ROLAND E-96 HOLD WRITE + POWER ON.
ROLAND E96 Power on while holding WRITE
ROLAND EF303 Power on whilst holding down SHIFT. Press WRITE twice. Turn the power OFF and On again.
ROLAND EM10 Power on while holding WRITE
ROLAND EM-101 no rom reset.
ROLAND EM20 Power on while holding WRITE
ROLAND EM2000 Please ring 01792 515003
ROLAND EM30 Power on while holding WRITE
ROLAND EM-303 resets at power on.
ROLAND EM-305 resets at power on.
ROLAND EM50 Power on while holding WRITE
ROLAND EP (ALL OTHER) no rom reset.
ROLAND EP-3 resets at power on.
ROLAND EP-5 HOLD REC + PLAY, PRESS STRINGS, POWER OFF / ON.
ROLAND EP-5 HOLD REC + PLAY, PRESS STRINGS, POWER OFF / ON.
ROLAND EP-7 HOLD REC + PLAY, PRESS STRINGS, POWER OFF / ON.
ROLAND EP7 While holding REC and PLAY, press STRINGS. Power off then on
ROLAND EP-707 resets at power on.
ROLAND EP75 Power on while holding REC
ROLAND EP-7MKII HOLD REC + PLAY, PRESS STRINGS, POWER OFF AND ON.
ROLAND EP85 Power on while holding REC
ROLAND EP-9 HOLD REC + PLAY, PRESS CHOIR, POWER OFF AND ON.
ROLAND EP9 While holding REC and PLAY, pres CHOIR. Power off and then on
ROLAND EP95 Power on while holding REC
ROLAND EP-mkII While holding REC and PLAY, press STRINGS. Power off then on
ROLAND FA76 Press MENU, then (UP) or (DOWN) to select FACTORY RESET. Press F8 (SELECT) then F8 (EXECUTE) to reset.
ROLAND FANTOM Press MENU, then (UP) or (DOWN) to select FACTORY RESET. Press F8 (SELECT) then F8 (EXECTUE) to reset.
ROLAND FC-100 no rom reset.
ROLAND FC100 No ROM Reset.
ROLAND FC-100MKII HOLD #1 + #2 + #8 AND POWER ON.
ROLAND FC100MKII Power on whilst holding pedals #1, #2 and #8.
ROLAND FC-200 HOLD #10 AND POWER ON, THEN PRESS CTL PEDAL.
ROLAND FC200 Power on whilst holding the #10 pedal, then press the CTL pedal.
ROLAND FG-10 HOLD CLEAR AND EXIT THEN POWER ON.
ROLAND FG10 Power on whilst holding down the CLEAR and EXIT buttons.
ROLAND FG-1000 HOLD CLEAR AND EXIT THEN POWER ON.
ROLAND FG1000 Power on whilst holding down the CLEAR and EXIT buttons.
ROLAND FP-1 resets at power on.
ROLAND FP1 The unit resets each time you turn it on
ROLAND FP-8 PRESS FUNC AND RELEASE HOLD PIANO PRESS FUNC AGAIN.
ROLAND FP8 Press FUNC and release. While holding PIANO, press FUNC again
ROLAND FP9 The unit resets each time you turn it on
milanceshow je offline   Reply With Quote
Star 03.02.2009, 23:36   #5
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 82 puta u 68 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

ROLAND G1000 Please call 01792 515003
ROLAND G600 Power on while holding WRITE
ROLAND G-800 HOLD WRITE, THEN POWER ON.
ROLAND G800 Power on while holding WRITE
ROLAND GC-8 no rom reset.
ROLAND GC8 No ROM Reset.
ROLAND GI-10 HOLD PARAMETER + AND -, POWER ON THEN PRESS VALUE +.
ROLAND GI10 Power on whilst holding down the PARAMETER + and - buttons, then press the VALUE + button.
ROLAND GM-70 POLY MODE: HOLD PLAY, GENERAL EDIT, + IND EDIT THEN POWER ON. MONO MODE: HOLD TUNE, CONTROL ASSIGN, AND DATA TRANSFER THEN POWER ON.
ROLAND GM70 Poly Mode: Power on whilst holding down PLAY, GENERAL EDIT and IND EDIT. Mono Mode: Power on whilst holding down TUNE, CONTROL ASSIGN, and DATA TRANSFER.
ROLAND GP-100 HOLD IN PARAMETER KNOB, POWER ON, PRESS WRITE.
ROLAND GP100 Power on whilst pressing in the PARAMETER KNOB, then press WRITE.
ROLAND GP-16 HOLD #6, #7, #8, THEN POWER ON. USE FUNCTION LEFT AND RUGHT TO SELECT "2. ALL FACTORY PRESET"THEN PRESS WRITE 3 TIMES.
ROLAND GP16 Power on whilst holding down the #6, #7 and #8 buttons. Use the FUNCTION (<) and (>) buttons to select "2.All Factory Preset", then press WRITE three times.
ROLAND GP-8 no rom reset.
ROLAND GP8 No ROM Reset.
ROLAND GR (ALL OTHER) no rom reset.
ROLAND GR-09 HOLD PEDAL #2 THEN POWER ON. PRESS VALUE+ THEN PRESS EDIT/PLAY.
ROLAND GR09 Power on whilst holding down the #2 pedal, then press the VALUE + button, followed by the EDIT/PLAY button.
ROLAND GR-1 HOLD WRITE/COPY THEN POWER ON THEN PRESS YES.
ROLAND GR1 Power on whilst holding down the WRITE/COPY button, then press YES
ROLAND GR-30 HOLD PEDAL #2, POWER ON. PRESS PATCH + TO SELECT INIT. PRESS EDIT/PLAY, THEN PATCH + AND - SIMULTANEOUSLY.
ROLAND GR30 Power on whilst holding down the #2 pedal, then press the PATCH + button to select INI. Press the EDIT/PLAY button and then the PATCH + and PATCH - buttons simultaneously.
ROLAND GR33 Press SYSTEM and then PARAMETER. Use the VALUE DIAL to select ALL in the display. Press WRITE twice.
ROLAND GR-50 no rom reset. {*}
ROLAND GS-6 no rom reset.
ROLAND GS6 No ROM Reset.
ROLAND GT3 Power on whilst holding down MOD and SFX. Press WRITE.
ROLAND GT-5 HOLD MOD + FEED BACKER/SLOW GEAR, POWER ON. THEN PRESS WRITE.
ROLAND GT5 Power on whilst holding down MOD and FEEDBACKER/SLOWGEAR. Press WRITE.
ROLAND GT6 Power on whilst holding down PREAMP SPEAKER ON/OFF and TYPE VARIATION. Press ENTER.
ROLAND GT6B Power on whilst holding down COMPRESSOR/LIMITER ON/OFF and TYPE VARIATION. Press ENTER
ROLAND GX-700 PRESS TUNER/UTILITY. USE PARAMETER LEFT AND RIGHT TO SELECT FACT INIT. CURSOR TO LEFT, DIAL SYSTEM, THEN RIGHT AND DIAL P#100. PRESS WRITE THEN TUNER/UTILITY.
ROLAND GX700 Press TUNER/UTILITY. Use PARAMETER (<) and (>) to select FACT INIT. Cursor LEFT and dial SYSTEM then cursor RIGHT and dial P#100. Press WRITE and then TUNER/UTILITY.
ROLAND HP (ALL OTHER) resets at power on.
ROLAND HP-100 no rom reset.
ROLAND HP-300 no rom reset.
ROLAND HP-400 no rom reset.
ROLAND HPD15 Press SYSTEM, then PARAMETER (>) RIGHT to "Factory Reset". Use the PATCH/VALUE DIAL to select ALL and press WRITE
ROLAND HS SERIES no rom reset.
ROLAND JD-800 PRESS DATA TRANSFER. PAGE UP TO SELECT FACTORY PRESET, PRESS YES.
ROLAND JD800 Press DATA TRANSFER. Use page UP and DOWN to select FACTORY PRESET, then press ENTER.
ROLAND JD-990 HOLD EXIT AND PRESS UTILITY. PRESS F6 THEN F5.
ROLAND JD990 Whilst holding EXIT, press UTILITY. Press F6 (EXECUTE) and the F5 (YES).
ROLAND JP-6 no rom reset.
ROLAND JP6 No ROM Reset.
ROLAND JP-8 no rom reset.
ROLAND JP8 No ROM Reset.
ROLAND JP-8000 HOLD SHIFT, PRESS INIT/BULK. PRESS BUTTON 7, USE UP/DOWN (SELECT FACTORY RESET), PRESS WRITE TO SELECT FACTORY PRESET.
ROLAND JP8000 Whilst holding down the SHIFT button, press INIT/UTIL. Press INIT/UTIL again util you get INITALIZE WRITE in the screen. Use the DOWN and UP buttons to select FACTORY PRESET, then press the WRITE button.
ROLAND JP8080 Press EDIT and then Bank 7 (also labelled INIT/UTIL) several times to access "FACTORY RESET " in the display. Press DEC or INC to select ALL in the screen and then press REC followed by WRITE.
ROLAND JS-30 HOLD RECORD BUTTON (SEQUENCER SECTION), POWER ON.
ROLAND JS30 Power on whilst holding down the RECORD button, located in the sequencer section.
ROLAND JS5 Press UTILITY then CURSOR (>) to "Factory Reset?". Press ENTER twice.
ROLAND JUN0-106 no rom reset.
ROLAND JUN0-60 no rom reset.
ROLAND JUNO 1 No ROM Reset.
ROLAND JUNO 106 No ROM Reset.
ROLAND JUNO 2 No ROM Reset.
ROLAND JUNO 6 No ROM Reset.
ROLAND JUNO 60 No ROM Reset.
ROLAND JUNO-1 no rom reset.
ROLAND JUNO-2 no rom reset.
ROLAND JUNO-6 no rom reset.
ROLAND JUPITER 6 No ROM Reset.
ROLAND JUPITER 8 No ROM Reset.
ROLAND JUPITER-6 no rom reset.
ROLAND JUPITER-8 no rom reset.
milanceshow je offline   Reply With Quote
Star 03.02.2009, 23:36   #6
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 82 puta u 68 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

ROLAND JV-1000 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE.
ROLAND JV1000 Power on whilst holding down the NUMBER 8 button (also labelled PERFORM and CAPS), press ENTER then press WRITE.
ROLAND JV1010 Whilst in PERFORM mode, press the VOLUME KNOB and VALUE KNOB together. Turn the CATEGORY/BANK KNOB to PIANO and press the VALUE KNOB twice.
ROLAND JV-1080 PRESS UTILITY. CURSOR DOWN ONCE THEN RIGHT 3 TIMES TO FACTORY PRESET. PRESS ENTER TWICE, THEN UTILITY.
ROLAND JV1080 Press UTILITY, cursor down once, then cursor right three times to select FACTORY PRESET. Press ENTER twice, then press UTILITY.
ROLAND JV-2080 PRESS UTILITY. PRESS F6 TWICE TO MENU 3. PRESS F1 THEN F6. IF REQ'D USE VALUE DIAL TO TURN OFF MEM. PROT. AND PRESS F6 TWICE.
ROLAND JV2080 Press UTILITY. Press F6 twice to select MENU 3. Press F1 and then F6 (turn the "memory protect" to OFF if necessary using the VALUE DIAL). Press F6 twice.
ROLAND JV-30 PRESS CHORUS + REVERB (ABOVE INIT) TOGETHER THEN PRESS VALUE UP.
ROLAND JV30 Press CHORUS and REVERB (above INITIALIZE) simultaneously. Press VALUE UP.
ROLAND JV-35 PRESS CONTROL + MASTER TOGETHER. USE PARAMETER UP AND DOWN TO SELECT ALL. PRESS VALUE UP.
ROLAND JV35 Press CONTROL and MASTER simultaneously. Press PARAMETER UP or DOWN to select ALL. Press VALUE UP.
ROLAND JV-50 PRESS CONTROL + MASTER TOGETHER. USE PARAMETER UP AND DOWN TO SELECT ALL. PRESS VALUE UP.
ROLAND JV50 Press CONTROL and MASTER simultaneously. Press PARAMETER UP or DOWN to select ALL. Press VALUE UP.
ROLAND JV-80 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE.
ROLAND JV80 Power on whilst holding down the NUMBER 8 button (also labelled PERFORM and CAPS), press ENTER then press WRITE.
ROLAND JV-880 PRESS UTILITY, USE DATA DIAL TO SELECT FACTORY PRESET. PRESS ENTER TWICE.
ROLAND JV880 Press UTILITY, then use the DATA DIAL to select FACTORY PRESET. Press ENTER twice.
ROLAND JV-90 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE.
ROLAND JV90 Power on whilst holding down the NUMBER 8 button (also labelled PERFORM and CAPS), press ENTER then press WRITE.
ROLAND JW-50 PRESS TUNE/FUNCTION. PRESS F5 THEN F4 THEN F3 THEN F4.
ROLAND JW50 Press TUNE/FUNCTION. Press F5 (FACTORY), then F4 (JW RESET), then F3 (GS RESET), then F4 (YES).
ROLAND JX-1 HOLD WRITE AND FLUTE THEN POWER ON.
ROLAND JX1 Power on whilst holding down WRITE and FLUTE.
ROLAND JX-10 no rom reset.
ROLAND JX10 No ROM Reset.
ROLAND JX-3P no rom reset.
ROLAND JX3P No ROM Reset.
ROLAND JX-8P no rom reset.
ROLAND JX8P No ROM Reset.
ROLAND KF90 Press FUNCTION, touch SYSTEM, touch FACTORY RESET, touch EXECUTE, touch OK
ROLAND KR-100 resets at power on.
ROLAND KR100 The unit resets each time you turn it on
ROLAND KR1070 Press FUNCTION and use PAGE buttons until FACTORY RESET is displayed, then tocuh EXECUTE, then touch OK
ROLAND KR177 Press UTILITY, use the PAGE buttons to select FACTORY PRESET and press EXECUTE then OK
ROLAND KR277 Press FUNCTION na duse TEMPO buttons until FNC42 is displayed in the window. Press TRANSPOSE twice
ROLAND KR-3000 HOLD FROM AND TO, THEN PRESS WRITE.
ROLAND KR3000 While holding FROM and TO, press WRITE
ROLAND KR-33 resets at power on.
ROLAND KR33 The unit resets each time you turn it on
ROLAND KR-350 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR350 While holding LOAD and SAVE, press WRITE
ROLAND KR-3500 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR3500 While holding LOAD and SAVE, press WRITE
ROLAND KR-370 resets at power on.
ROLAND KR370 The unit resets each time you turn it on
ROLAND KR375 Press FUNCTION and use TEMPO buttons until FNC42 is displayed in the window. Press TRANSPOSE twice
ROLAND KR377 Press FUNCTION and use PAGE buttons until FACTORY RESET is displayed, then press EXECUTE, then OK
ROLAND KR-4500 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR4500 While holding LOAD and SAVE, press WRITE
ROLAND KR-4700 HOLD LOAD AND EDIT, THEN PRESS SAVE.
ROLAND KR4700 While holding EDIT, press LOAD and SAVE
ROLAND KR-500 HOLD FROM AND TO, THEN PRESS WRITE.
ROLAND KR500 While holding FROM and TO, press WRITE
ROLAND KR-5000 HOLD LOAD AND EDIT, THEN PRESS SAVE.
ROLAND KR5000 While holding EDIT, press LOAD and SAVE
ROLAND KR-55 HOLD MIDI FUNCTION AND PRESS CARDS (5 SECONDS).
ROLAND KR55 Hold MIDI/FUNC and press CARD. Hold both VARIATION buttons for 5 seconds
ROLAND KR-5500 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR5500 While holding LOAD and SAVE, press WRITE
ROLAND KR570 While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons simultaneously.
ROLAND KR575 Press FUNCTION and use PAGE buttons until FACTORY RESET is displayed, then press EXECUTE, then OK
ROLAND KR577 Press FUNCTION and use PAGE buttons until FACTORY RESET is displayed, then touch EXECUTE, then touch OK
ROLAND KR-650 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR650 While holding LOAD and SAVE, press WRITE
ROLAND KR75 Press UTILITY, use the buttons under PAGE to select FACTORY PRESET, press EXECUTE, then OK.
ROLAND KR770 While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons simultaneously.
ROLAND KR977 Press FUNCTION and use PAGE buttons until FACTORY RESET is displayed, then touch EXECUTE, then touch OK
milanceshow je offline   Reply With Quote
Star 03.02.2009, 23:37   #7
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 82 puta u 68 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

ROLAND LVC1 Power on while holding ENTER
ROLAND LVC-1N HOLD ENTER BUTTON THEN POWER ON.
ROLAND M-760 HOLD EDIT, PRESS WRITE. PARAMETER UP/DOWN TO SELECT ALL + PRESS WRITE. ON COMPLETION PRESS EDIT TO RETURN TO PLAY.
ROLAND MBD1 HOLD F3 AND THEN POWER ON.
ROLAND MBD1 Power on whilst holding down the F3 button.
ROLAND MC SERIES; EXC 303 no rom reset.
ROLAND MC SERIES; EXC 303 no rom reset.
ROLAND MC-303 HOLD SHIFT AND THEN POWER ON, THEN PRESS ENTER.
ROLAND MC303 Power on whilst holding down the SHIFT button, then press ENTER.
ROLAND MC307 Press SYSTEM, then F2 (UTIL). CURSOR DOWN to FACTORY RESET and press F1 (FACT). Press F4 (EXEC).
ROLAND MC50 No ROM Reset.
ROLAND MC505 Power on whilst holding down the SHIFT button, then press ENTER.
ROLAND MC50MKII No ROM Reset.
ROLAND MC80 No ROM Reset.
ROLAND MC80EX No ROM Reset.
ROLAND M-DC1 HOLD F3 AND THEN POWER ON.
ROLAND M-DC1 HOLD F3 AND THEN POWER ON.
ROLAND MDC1 Power on whilst holding down the F3 button.
ROLAND ME-10 HOLD BANK DOWN PEDAL, THEN PRESS WRITE.
ROLAND ME10 Power on whilst holding down the BANK DOWN pedal, then press WRITE.
ROLAND ME30 Power on whilst holding down the PARAMETER (>) RIGHT and VALUE - then press WRITE/COPY.
ROLAND ME33 Power on whilst holding down EZ TONE and AMP/EFFECT(>) then press WRITE.
ROLAND ME-5 HOLD PEDALS 1 AND 2, POWER ON; PRESS WRITE IMMEDIATELY.
ROLAND ME5 Power on whilst holding down pedals #1 and #2, then press WRITE immediately.
ROLAND ME-6 HOLD LEFT + DOWN AND POWER ON; THEN PRESS WRITE.
ROLAND ME6 Power on whilst holding down the PARAMETER DOWN and LEFT buttons, then press WRITE.
ROLAND ME-6B HOLD LEFT + DOWN AND POWER ON; THEN PRESS WRITE.
ROLAND ME6B Power on whilst holding down the PARAMETER DOWN and LEFT buttons, then press WRITE.
ROLAND ME-8 HOLD LEFT + DOWN AND POWER ON; PRESS WRITE/COPY.
ROLAND ME8 Power on whilst holding down the PARAMETER DOWN and LEFT buttons, then press WRITE/COPY.
ROLAND ME-8B HOLD PARAMETER LEFT + DOWN BUTTONS, THEN PRESS WRITE/COPY.
ROLAND ME8B Power on whilst holding down the PARAMETER DOWN and LEFT buttons, then press WRITE/COPY.
ROLAND ME-X HOLD PARAMETER LEFT + DOWN AND POWER ON, THEN PRESS WRITE.
ROLAND MEX Power on whilst holding down the PARAMETER DOWN and LEFT buttons, then press WRITE.
ROLAND M-GS64 HOLD F3 AND THEN POWER ON.
ROLAND MGS64 Power on whilst holding down the F3 button.
ROLAND MK60 No ROM Reset.
ROLAND MK-80 HOLD WRITE, PRESS EDIT. HOLD LEFT AND RIGHT CURSOR BUTTONS AND PRESS UP.
ROLAND MK80 While holding WRITE, press EDIT. Then whilst holding down the LEFT (<) and RIGHT (>) CURSOR buttons, press the UP CURSOR.
ROLAND MKB SERIES no rom reset.
ROLAND MKS-50 POLY MODE: HOLD 4 AND 8 AND POWER ON. MONO MODE: HOLD 3 AND 7 THEN POWER ON.
ROLAND MKS-50 MONO MODE: HOLD NUMBER BUTTONS 3 AND 7 AND POWER ON.
ROLAND MKS50 Poly Mode: Power on whilst holding down the number 4 and 8 buttons. Mono Mode: Power on whilst holding down the number 3 and 7 buttons
ROLAND MMP2 Press SYSTEM until it lights orange. Use the PAGE (<)(>) buttons to select INITIALIZE and use the left VALUE CONTROL to select ALL, then press ENTER twice.
ROLAND M-OC1 HOLD F3 AND THEN POWER ON.
ROLAND MOC1 Power on whilst holding down the F3 button.
ROLAND MP SERIES no rom reset.
ROLAND MS-1 no rom reset.
ROLAND MS1 No ROM Reset.
ROLAND M-SE1 HOLD F3 AND THEN POWER ON.
ROLAND MSE1 Power on whilst holding down the F3 button.
ROLAND MSQ-100 no rom reset.
ROLAND MSQ100 No ROM Reset.
ROLAND MSQ-700 no rom reset.
ROLAND MSQ700 No ROM Reset.
ROLAND MT-100 HOLD STOP, PRESS DELETE. AFTER THE DISPLAY FLASHES "ALL CLEAR" PRESS EXECUTE.
ROLAND MT100 While holding STOP, press DELETE. After the display flashes ALL CLEAR, press EXECUTE
ROLAND MT-120 HOLD REPEAT, SONG (BLUE), AND PLAY, POWER ON. PRESS FWD REPEATEDLY UNTIL READS T13. PRESS PLAY THEN RECORD, THEN POWER OFF/ON.
ROLAND MT120 Power on while holding REPEAT, SONG and PLAY. Press FWD until the window reads T-13.
ROLAND MT-120S HOLD REPEAT, SONG (BLUE), AND PLAY, POWER ON. PRESS FWD REPEATEDLY UNTIL READS T13. PRESS PLAY THEN RECORD, THEN POWER OFF/ON.
ROLAND MT-200 HOLD REPEAT, SONG (BLUE), AND PLAY, POWER ON. USE DIAL TO SELECT T-15 ON DISPLAY. PRESS PLAY THEN RECORD, THEN POWER OFF/ON.
ROLAND MT200 Power on while holding REPEAT, SONG and PLAY. Use the DIAL until the window reads T-15.
ROLAND MT300 Press MENU, use the DIAL until FACTORY PRESET is displayed in the window. Press ENTER twice
ROLAND MT-32 HOLD MASTER VOLUME, PRESS RHYTHM PART, PRESS PART 1.
ROLAND MT32 While holding MASTER VOLUME, press RHYTHM PART. Press PART 1
ROLAND MT-80 resets at power on.
ROLAND MT80 The unit resets each time you turn on
ROLAND MV-30 no rom reset.
ROLAND MV30 No ROM Reset.
ROLAND M-VS1 HOLD F3 AND THEN POWER ON.
ROLAND MVS1 Power on whilst holding down the F3 button.
ROLAND OCTAPAD HOLD MIDI CH AND NOTE NUMBER, POWER ON. POWER OFF, THEN POWER ON AGAIN.
ROLAND OCTAPAD II HOLD BOTH VALUE BUTTONS, POWER ON.
ROLAND P-330 no rom reset.
ROLAND P-55 HOLD BOTH INSTRUMENT BUTTONS, POWER ON, THEN PRESS PARAM 1.
ROLAND PAD-8 HOLD MIDI CH AND NOTE NUMBER, POWER ON. POWER OFF, THEN POWER ON.
ROLAND PAD8 Power on whilst holding down the MIDI CH and NOTE NUMBER. Power the unit OFF and then back ON again.
ROLAND PAD-80 HOLD BOTH VALUE BUTTONS, POWER ON.
ROLAND PAD80 Power on whilst holding down both the VALUE buttons.
milanceshow je offline   Reply With Quote
Star 03.02.2009, 23:38   #8
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 82 puta u 68 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

ROLAND PC-150 HOLD COMMAND (LEFT), POWER ON.
ROLAND PC-200 HOLD THE 2 BUTTONS UNDER "STANDARD", POWER ON.
ROLAND PIANO PLUS (ALL) no rom reset.
ROLAND PK5 Power on while holding OCT/PARAM
ROLAND PK7 No ROM reset
ROLAND PLANET-P no rom reset.
ROLAND PLANET-S no rom reset.
ROLAND PMA-5 HOLD VALUE, POWER ON. TOUCH 2 CAL. POINTS TOP RIGHT + BOTTOM LEFT OF DISPLAY W/ TOUCH PEN. DISPLAYS COMPLETED THEN INITIALIZE, TOUCH EXEC.
ROLAND PRO-E HOLD WRITE, POWER ON.
ROLAND R-5 HOLD PAGE + SELECT AND POWER ON. PRESS ENTER TWICE AT PROMPTS.
ROLAND R5 Power on whilst holding down CUROR PAGE and PARAM SELECT, then press the ENTER button twice.
ROLAND R-70 HOLD MIDI + ASSIGN AND POWER ON. PRESS YES TWICE AT PROMPTS.
ROLAND R70 Power on whilst holding down the MIDI and ASSIGN buttons.
ROLAND R8 Power on whilst holding down CUROR PAGE and PARAM SELECT, then press the ENTER button twice.
ROLAND R880 No ROM Reset.
ROLAND R-8M HOLD CURSOR RIGHT AND ENTER, POWER ON. PRESS ENTER TWICE AT PROMPTS.
ROLAND R8M Power on whilst holding down ENTER and RIGHT (>) CURSOR, then press the ENTER button twice.
ROLAND R8MKII Power on whilst holding down CUROR PAGE and PARAM SELECT, then press the ENTER button twice.
ROLAND RA30 The unit resets each time you turn it on
ROLAND RA-50 HOLD WRITE THEN POWER ON.
ROLAND RA50 Power on while holding WRITE
ROLAND RA800 Power on while holding WRITE
ROLAND RA-90 HOLD WRITE THEN POWER ON.
ROLAND RA90 Power on while holding WRITE
ROLAND RA-95 HOLD REC, POWER ON.
ROLAND RA95 Power on while holding REC
ROLAND RD100 No ROM Reset
ROLAND RD500 Power on whilst holding down the NUMBER 1 and 8 buttons, then press DEC/YES.
ROLAND RD600 Press EDIT, then the RIGHT PAGE button until "INITIALIZE ALL" is displayed. Press INC/YES twice. Press EDIT to return to the play mode.
ROLAND RD600 Press EDIT, use page button to display INT ALL, press YES twice and EDIT to return to play mode
ROLAND RD700 Press EDIT, then press TONE SWITCH 9. Press ENTER then CURSOR DOWN to FACTORY RESET ALL. Press ENTER and then the YES button.
ROLAND RS5 Press UTILITY. Use the VALUE + or - to select "FACTORY RESET" then press ENTER.
ROLAND RS9 Press UTILITY. Use the VALUE + or - to select "FACTORY RESET" then press ENTER.
ROLAND RSP-550 POWER ON WHILE HOLDING PROG PAGE UP AND DOWN, THEN PRESS WRITE.
ROLAND RSP550 Power on whilst holding down PROGRAM, PAGE UP and PAGE DOWN. Then press WRITE.
ROLAND RSS10 Power on whilst holding down LOCK and OPTION.Press DEMO PROGRAM four times. Then press DEVICE ID.
ROLAND RSS8040 No ROM Reset.
ROLAND RV70 Power on whilst holding down WRITE and DOWN. Use the UP and DOWN buttons to select ALL. Press WRITE, then power the unit OFF and back On again.
ROLAND SB-55 POWER ON WHILE CLEAR.
ROLAND SBX1000 No ROM Reset.
ROLAND SC-155 POWER IN STANDBY MODE. HOLD BOTH INSTRUMENT BUTTONS, PRESS POWER ON AND THEN PRESS ALL.
ROLAND SC155 Power on while holding both INSTRUMENT buttons, then press ALL
ROLAND SC-33 HOLD SPLIT AND REVERB WHILE POWERING ON, THEN PRESS YES.
ROLAND SC33 Power on while holding REVERB and SPLIT, then press YES
ROLAND SC-50 HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL.
ROLAND SC50 Power on while holding both INSTRUMENT buttons, then press ALL
ROLAND SC-55 HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL.
ROLAND SC55 Power on while holding both INSTRUMENT buttons, then press ALL
ROLAND SC-55MKII HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL.
ROLAND SC-55MKII HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL.
ROLAND SC55mkII Power on while holding both INSTRUMENT buttons, then press ALL
ROLAND SC7 The unit resets each time you turn on
ROLAND SC88 While holding SELECT, press both INSTRUMENT buttons, then press ALL
ROLAND SC88pro While holding SELECT, press both INSTRUMENT buttons, then press ALL
ROLAND SD35 Power on while holding CLEAR, then press REC
ROLAND SDD320 No ROM Reset.
ROLAND SDE330 Power on whilst holding down SYSTEM and PROGRAM. Use the DATA DIAL to select SYSTEM + PROGRAM. Press MEMORY.
ROLAND SDX330 Power on whilst holding down SYSTEM and PROGRAM. Use the DATA DIAL to select SYSTEM + PROGRAM. Press MEMORY.
ROLAND SE50 Power on whilst holding down PARAM UP and VALUE UP. Press WRITE, wait for three seconds and the press WRITE again..
ROLAND SE70 Power on whilst holding in the NUMBER/VALUE knob, press PARAMETER (<) LEFT. Use the NUMBER/VALUE knob to select STANDARD mode or GUITAR mode. Press WRITE.
ROLAND SH101 No ROM Reset.
ROLAND SH2000 No ROM Reset.
ROLAND SH32 Power on whilst holding down (1/A), press VALUE UP/DOWN to display ALL in the screen. Press WRITE twice.
ROLAND SN700 No ROM Reset.
ROLAND SP202 Power on wihlst holding down the SOURCE pad.
ROLAND SP303 Power on whilst holding down CANCEL, REMAIN and DEL, then press REC.
ROLAND SP505 Press SONG, then SYSTEM. Press F1(UTILITY) then F3(INIT). Use the VALUE DIAL to select ALL and press F1 twice to execute the operation. Press PTN or SONG to return to the play screen.
ROLAND SP700 No ROM Reset.
ROLAND SP808 Press SYSTEM/DISK and CUROR DOWN to "Init System Parameters?". Press ENTER/YES twice and then press PLAY to return to the basic screen.
ROLAND SP808EX Press SYSTEM/DISK and CUROR DOWN to "Init System Parameters?". Press ENTER/YES twice and then press PLAY to return to the basic screen.
ROLAND SPD11 Power on whilst holding down ALL/ENTER and DOWN. Then press ALL/ENTER again.
milanceshow je offline   Reply With Quote
Star 03.02.2009, 23:38   #9
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 82 puta u 68 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

ROLAND SPD20 Power on whilst holding down the CURSOR DOWN and ALL/ENTER. Press the ALL/ENTER button again to complete the proceedure.
ROLAND SPD8 Power on whilst holding down EDIT, then press COPY. Use the VALUE UP and DOWN to select "F_A_L" in the screen. Press ALL/ENTER.
ROLAND SRC2 No ROM Reset.
ROLAND SRV1000 No ROM Reset
ROLAND SRV2000 Power on whilst holding down the WRITE and REVERB NON LINEAR buttons.
ROLAND SRV3030 Press MEMORY. Use the NUMBER/PAGE DIAL to display "FACTORY RESET" . Rotate PARAM 3 to set the target to ALL, then press ENTER twice.
ROLAND SRV3030D Press MEMORY. Use the NUMBER/PAGE DIAL to display "FACTORY RESET" . Rotate PARAM 3 to set the target to ALL, then press ENTER twice.
ROLAND SRV330 Power on whilst holding down SYSTEM and PROGRAM. Use the DATA DIAL to select SYSTEM + PROGRAM. Press MEMORY.
ROLAND SSC8004 No ROM Reset
ROLAND SX700 Press UTILITY. Use PARAMETER (<) LEFT and (>) RIGHT to select FACT INIT, then press WRITE.
ROLAND TB303 No ROM Reset
ROLAND TD10 Press SETUP, then press F4 three times.
ROLAND TD5 Power on whilst holding down EDIT and START/STOP, then press START/STOP again.
ROLAND TD6 Whilst holding SHIFT, press EDIT(SETUP) then CURSOR (>) to FACTORY RESET. Press ENTER then INC/DEC to select ALL, finish by pressing ENTER.
ROLAND TD7 Press SYSTEM. Use the CURSOR keys to select INI and press ENTER. CURSOR to HIHAT and use the DATA DIAL to select ALL. Press ENTER twice.
ROLAND TD8 Press SYSTEM then F3(MENU), use the CURSOR DOWN to select RESET and then press F3 again. Use the VALUE DIAL to select ALL and then press F3 twice.
ROLAND TD-8 V CUSTOM PRESS SETUP THEN [F3 (MENU)]. PRESS INC/+, ROTATE THE VALUE DIAL, OR PRESS CURSOR TO MOVE THE CURSOR TO "RESET".
ROLAND TD-8 V CUSTOM PRESS SETUP THEN [F3 (MENU)]. PRESS INC/+, ROTATE THE VALUE DIAL, OR PRESS CURSOR TO MOVE THE CURSOR TO "RESET".
ROLAND TP20 No ROM Reset
ROLAND TR-505 HOLD PATTERN GROUP A AND MODE AND POWER ON.
ROLAND TR505 Power on whilst holding down MODE and PATTERN KEY GROUP A.
ROLAND TR-626 HOLD TRACK #1 AND MODE AND POWER ON.
ROLAND TR626 Power on whilst holding down MODE and TRACK #1.
ROLAND TR-707 HOLD TRACK WRITE AND PATTERN 1 AND POWER ON.
ROLAND TR707 Power on whilst holding down TRACK WRITE and TRACK #1.
ROLAND TR-727 HOLD TRACK WRITE AND PATTERN 1 AND POWER ON.
ROLAND TR727 Power on whilst holding down TRACK WRITE and TRACK #1.
ROLAND TR808 No ROM Reset
ROLAND TR-909 HOLD TRACK #1 AND PATTERN #1 AND POWER ON.
ROLAND TR909 Power on whilst holding down TRACK #1 and Pattern #1.
ROLAND U-110 HOLD THE EDIT AND PART BUTTONS AND POWER ON.
ROLAND U110 Power on whilst holding down PART and EDIT.
ROLAND U20 No ROM Reset
ROLAND U220 No ROM Reset
ROLAND VA5 Press FUNCTION MENU, then touch GLOBAL PARAMETER. Touch ALL underneath Factory Resume
ROLAND VA7 Press FUNCTION MENU, then touch GLOBAL PARAMETER. Touch ALL underneath Factory Resume
ROLAND VBASS Whilst holding down the PAGE < and PAGE > turn on the power. Press the WRITE button twice.
ROLAND VF1 Press UTILITY, then rotate the VALUE DIAL to display "FACT RESET". Press ENTER three times.
ROLAND VG8 Power on whilst holding down F1, F3 and F5. Then press either (F6:ALL)(F4ATCHES)(F2YSTEM).
ROLAND VG88 Power on whilst holding down the PAGE < and PAGE >. Then press WRITE twice.
ROLAND VG8EX Power on whilst holding down F1, F3 and F5. Then press either (F6:ALL)(F4ATCHES)(F2YSTEM).
ROLAND VGA7 Power on whilst holding down the WRITE button, FLD ALL will flash in the LED. Press WRITE again to complete the proceedure.
ROLAND VK1000 Press WRITE, then press F3 to access the INIT MENU screen. Press F4 to access the COLD BOOT Scren, then press ENTER.
ROLAND VK7 Power on whilst holding down MAIN, SUB and PEDAL in the HARMONIC BAR PART.
ROLAND VK8 Power on whilst holding down UPPER. LOWER and PEDAL in the HARMONIC BAR PART until all the panel indicators light.
ROLAND VP-70 HOLD MIDI, PLAY, AND VOICE EXP AND POWER ON.
ROLAND VP70 Power on whilst holding down PLAY, VOICE EXPANSION and MIDI.
ROLAND VP9000 Press UTILITY then PART (>) to go to MENU 2. Press F1 (FACTORY) and then F6 (EXEC).
ROLAND VS1680 No ROM Reset
ROLAND VS1680EX No ROM Reset
ROLAND VS1824 No ROM Reset
ROLAND VS1824CD No ROM Reset
ROLAND VS1880 No ROM Reset
ROLAND VS2480 No ROM Reset
ROLAND VS2480CD No ROM Reset
ROLAND VS840 No ROM Reset
ROLAND VS840EX No ROM Reset
ROLAND VS840GX No ROM Reset
ROLAND VS880 No ROM Reset
ROLAND VS880EX No ROM Reset
ROLAND VS890 No ROM Reset
ROLAND VT1 Power on whilst holding down the PRESET/USER button.
ROLAND W30 No ROM Reset
ROLAND W50 Press CONTROL and MASTER simultaneously. Use PARAMETER UP and DOWN to select ALL
milanceshow je offline   Reply With Quote
Star 03.02.2009, 23:39   #10
milanceshow
Nishki
 
milanceshow's Avatar
 
Registrovan/a dana: 02.12.2007
Mjesto: Srbija,Nis-Prokuplje
Postovi: 1.332
Downloads: 538
Uploads: 16
Rekao HVALA: 9
Zahvalili mu 82 puta u 68 Postova
Instrumenti: Roland E80 i FantomG
Interesi: Heklanje....
milanceshow ist zur Zeit noch ein unbeschriebenes Blatt
milanceshow pošalji poruku preko MSN messengera
Standard

ROLAND XP10 Press UTILITY. Use the VALUE + or - to select INITIALIZE, then press ENTER. Use the VALUE + or - to select FACTORY PRESET, then press ENTER.
ROLAND XP30 Press UTILITY/CARD. Press the CURSOR DOWN then press #4 (BASS). Press ENTER (if protect message appears, use the DIAL to turn the Memory Protect OFF, then press ENTER twice).
ROLAND XP-50 PRESS DISK UTIL, SELECT SOUND, THEN PROTECT, SETMEM PROTECT OFF. EXIT, SELECT PRESET AND PRESS ENTER. (REMEMBER TO SET MEM PROTECT BACK ON ).
ROLAND XP50 Press DISK/UTILITY. Select SOUND, then select PRESET and press ENTER. Use the DIAL to turn the Memory Protect OFF if necessary, then press ENTER twice.
ROLAND XP60 Press UTILITY then F6 twice to select FACTORY and press ENTER. Press F6 (EXECUTE), then use the DIAL to turn the Memory Protect OFF if necessary, then press ENTER then press F6 (EXECUTE).
ROLAND XP80 Press UTILITY then F6 twice to select FACTORY and press ENTER. Press F6 (EXECUTE), then use the DIAL to turn the Memory Protect OFF if necessary, then press ENTER then press F6 (EXECUTE).
ROLAND XV2020 Whilst in PERFORM mode, press the VOLUME KNOB and VALUE KNOB together. Turn the CATEGORY/BANK KNOB to PIANO and press the VALUE KNOB twice.
ROLAND XV3080 Press UTILITY and the CURSOR DOWN to UTIL page 2. CUROSR (<) or (>) to make the FACTORY RESET flash. Press ENTER three times.
ROLAND XV5050 Press UTILITY and then CUROR (<). Turn the VALUE DIAL to select FACTORY RESET and press ENTER twice.
ROLAND XV5080 Press SYSTEM/UTILITY so that the light starts blinking. Press F6 (MENU) and then F5 (FACTORY). Then press F6 (EXECUTE).
ROLAND XV88 Press UTILITY and then CURSOR DOWN to UTILITY page 2. Press 4(BASS) and then ENTER twice.
milanceshow je offline   Reply With Quote
Sledeći član vam se zahvalio milanceshow za ovaj koristan post:
makikorg (29.08.2009)
Odgovor

Favoriti

Oznake
casio, korg, reset, roland, yamaha

Alati tema
Display Modes

Vaše dozvole
Ne možete postavljati Nove Teme
Ne možete poslati Odgovora
Ne možete postavili Privitke
Ne možete uređivati vaših Postova

BB-Kod je Uključeno.
Smajlići su Uključeno.
[IMG] Code jeUključeno.
HTML-Kod je Uključeno.

Brzi pregled


Trenutno vrijeme na Forumu 11:02


Forum Yu-Midi.org pokreće vBulletin 3.8.1 (Deutsch)
Copyright ©2005 - 2019, Jelsoft Enterprises Ltd. .
Dizajn i izrada sajta www.neospindle.com
Prava zaštićena od strane www.yu-midi.org
ForumForum Privatne porukePrivatne poruke UP/Down CentarUpload/Download Centar TekstoviTekstovi VestiVesti TutorialTutorial AdresarAdresar KalendarKalendar Lista članovaLista članova FacebookFacebook DonacijeDonacije